We will try again today to help you to solve the small complications associated with your car. We have recently seen how to unblock a fuel door, or a tank cap, today we will concentrate on an annoying problem that can be dangerous in bad climate conditions, being a victim of wiper stuck on Renault Kangoo 2 . And to answer this, we will first try to figure out why the wipers on your Renault Kangoo 2 remain stuck and, secondly, how to unblock them.

wiper-stuck-renault-kangoo-2

Why does the wiper of my Renault Kangoo 2 stay stuck?

So we will start our article with the reasons of the stuck wipers of your Renault Kangoo 2 . First of all we will concentrate on the front wipers and in a second time on the rear wiper.

Why are the front wipers on my Renault Kangoo 2 stuck in up or down position?

We will go through one by one the different complications that can trigger the front wipers of your Renault Kangoo 2 to get stuck :

  • One of the most general motives of front wipers getting stuck on your Renault Kangoo 2 is associated with the engine that drives them, in fact, these engines can, over time, lose power, and sooner or later need to be changed. You should find out before the total blockage of your windshield wipers that they work much slower.
  • Less general, but it can still happen, is that your front wiper blades are blocked as a result of an object that prevents the blades from working, examine up to the axis of the blades.
  • If it is a lack of lubrication, you will discover that your front wipers are going slower, verify quickly the cause of the trouble or else the engines will be forced and damaged.
  • It is possible that the front wipers of your Renault Kangoo 2 may not function as a result of a faulty comodo. To test this, you need to disconnect the output wires and connect them together, if the wipers are working, the comodo is responsible for the problem.
  • Finally, last possibility, the front wipers of your Renault Kangoo 2 are blocked as a result of a power failure, so you will have to verify two auto parts, the relay and the fuse.

Why is the rear window wiper on my Renault Kangoo 2 stuck?

Concerning the stuck rear window wiper of your Renault Kangoo 2 , the origins of your problems are more or less the same. Although there is only one wiper blade at the rear of your car, there are still some dedicated auto parts that can trigger complications only on the rear windshield of your Renault Kangoo 2. So, make sure you accomplish the same inspections as seen in the previous part of this article.

What can I do to unlock the wiper on my Renault Kangoo 2?

Finally, to do this second part, we will see what solutions are available to you to make certain that the wipers on your Renault Kangoo 2 are unlocked and that they function effectively again.

How to unlock the wipers of my Renault Kangoo 2?

If it is for the front windshield wipers or the rear windshield wiper, the solutions will be the same and we will detail them one after the other in this part, it is up to you to adapt them to the part that concerns you. If you have other blocking complications such as a fuel door stuck on Renault Kangoo 2, do not hesitate to consult our article on this problem.

  • In this case, you will have to locate the engine, then disconnect the power cables of this one (be cautious there must be several of them associated with the different speeds of sweeping), then remove the brushes and the linkage. Finally, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your Renault Kangoo 2
  • .

  • In this scenario, it will be quite very easy but expensive to change your commodo, the part generally costs around 200€, once tested you will be able to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
  • Renault Kangoo 2 wiper blocked caused by a power failure: In this last scenario, you will have to locate the source of the failure (fuse or relay) and replace the faulty part

.

If you wish more tutorials on the Renault Kangoo 2, go to our Renault Kangoo 2 category.