Today we’re going to deal with one more subject in the series on car care. This is the coolant level, and specifically where to put coolant in Volkswagen Polo 6? For this, we will begin this guideline with a little reminder on the interest of making sure of the coolant level of your car, then, where to fill coolant in Volkswagen Polo 6? And, finally, how to make the level of this famous liquid.

put-coolant-volkswagen-polo-6

Why to fill coolant level on a Volkswagen Polo 6?

Before we describe where the coolant is on a Volkswagen Polo 6, we begin our article by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Volkswagen Polo 6 has an essential function in the good performing of your engine, in reality, it will circulate in it to capture the heat generated by its process and transfer it to your radiator which has the mission to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine would overheat after just a few minutes, and this would end result in engine failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops down below the minimum level, the circulation of the coolant in the cooling system may be impaired and consequently its effectiveness may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Volkswagen Polo 6?

We now move on to the step that you are likely most enthusiastic about, where to put coolant in Volkswagen Polo 6? You are now aware of the importance of constantly having the ideal level of this coolant. To identify it is very basic, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Volkswagen Polo 6:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly identify the expansion tank that contains the coolant of your Volkswagen Polo 6, it is usually found in one of the 4 corners of your engine block, to identify it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Volkswagen Polo 6?

Now that you have identify where the coolant is in your Volkswagen Polo 6 , we will describe how to produce the level of it. Nothing could be easier, just stick to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Volkswagen Polo 6 the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is sufficient

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Softly add coolant to the expansion tank of your Volkswagen Polo 6 by looking at frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, take out the excess coolant.

If the engine of your Volkswagen Polo 6 warms up despite a level coolant, read this article, you will have the ability to find the causes of this problem.

If you need more tutorials on the Volkswagen Polo 6, go to our Volkswagen Polo 6 category.