In this article we’re going to deal with one more theme in the series on car care. This is the coolant level, and specifically where to put coolant in Mercedes Classe S? To do this, we will commence this article with a little reminder on the benefit of making sure of the coolant level of your car, then, where to fill coolant in Mercedes Classe S? And, at last, how to make the level of this famous liquid.

put-coolant-mercedes-classe-s

Why to fill coolant level on a Mercedes Classe S?

Before we describe where the coolant is on a Mercedes Classe S, we commence our content by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Mercedes Classe S has an important action in the good functioning of your engine, in reality, it will circulate in it to capture the heat generated by its operation and transfer it to your radiator which has the objective to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after only a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level always. If your coolant level drops below the lowest level, the circulation of the coolant in the cooling system might be reduced and consequently its efficiency might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Mercedes Classe S?

We now proceed to the step that you are probably most enthusiastic about, where to put coolant in Mercedes Classe S? You are now informed of the importance of constantly having the ideal level of this coolant. To locate it is very basic, here are the different steps to allow you to find the expansion tank that contains the coolant of your Mercedes Classe S:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly locate the expansion tank that contains the coolant of your Mercedes Classe S, it is generally based in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Mercedes Classe S?

Now that you have identify where the coolant is in your Mercedes Classe S , we will describe how to make the level of it. Nothing could be simpler, just adhere to the few steps below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Mercedes Classe S the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or below the “min” mark you can continue to follow these steps, otherwise the level of your liquid is good enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Carefully add coolant to the expansion tank of your Mercedes Classe S by checking repeatedly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, remove the excess coolant.

If the engine of your Mercedes Classe S warms up despite a level coolant, read this content, you will be able to find the causes of this issue.

In the event that you have any additional questions about the Mercedes Classe S, do not hesitate to consult our Mercedes Classe S category.