In this article we’re going to talk about one more subject in the series on car care. This is the coolant level, and specifically where to put coolant in Chevrolet Captiva? For this, we will begin this article content with a little reminder on the interest of making sure of the coolant level of your car, then, where to fill coolant in Chevrolet Captiva? And, at last, how to make the level of this famous liquid.
Why to fill coolant level on a Chevrolet Captiva?
Before we explain where the coolant is on a Chevrolet Captiva, we begin our article by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Chevrolet Captiva has a vital action in the good performing of your engine unit, the fact is, it will circulate in it to catch the heat made by its operation and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after just a few minutes, and this would result in engine unit failure, hence the importance of having an ideal coolant level constantly. If your coolant level drops down below the minimal level, the circulation of the coolant in the cooling system may be bothered and therefore its effectiveness may be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and trigger a leak that can also trigger the engine unit to break down.
Where to put the coolant in Chevrolet Captiva?
We now move on to the step that you are almost certainly most keen on, where to put coolant in Chevrolet Captiva? You are now informed of the importance of constantly having the ideal level of this coolant. To locate it is very basic, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Chevrolet Captiva:
- Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
- Pop the hood of your car.
- You must quickly locate the expansion tank that contains the coolant of your Chevrolet Captiva, it is in most cases based in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.
How to fill up the coolant level on a Chevrolet Captiva?
Now that you have identify where the coolant is in your Chevrolet Captiva , we will explain how to make the level of it. Nothing could be easier, just adhere to the few steps down below:
- Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
- Verify on the side of the expansion tank of your Chevrolet Captiva the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is sufficient
- After waiting for the engine to cool down, you can open the coolant cap of your car.
- Softly add coolant to the expansion tank of your Chevrolet Captiva by examining regularly.
- Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
- If you’re on top of it, don’t start your engine unit, and with a syringe, take out the excess coolant.
.
If the engine unit of your Chevrolet Captiva warms up despite a level coolant, browse this article, you will be able to find the causes of this issue.
If you wish more tutorials on the Chevrolet Captiva, go to our Chevrolet Captiva category.
