Today we’re going to talk about one more topic in the series on car care. This is the coolant level, and more specifically where to put coolant in Bmw Serie 1? To do this, we will commence this content with a little reminder on the benefit of ensuring of the coolant level of your car, then, where to fill coolant in Bmw Serie 1? And, finally, how to make the level of this famous liquid.

put-coolant-bmw-serie-1

Why to fill coolant level on a Bmw Serie 1?

Before we explain where the coolant is on a Bmw Serie 1, we commence our article by reminding you what is the benefit of guaranteeing an ideal coolant level ? The coolant of a Bmw Serie 1 has an essential function in the good functioning of your engine unit, in reality, it will circulate in it to catch the heat made by its operation and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine unit would overheat after just a few minutes, and this would end result in engine unit failure, hence the importance of having an ideal coolant level always. If your coolant level drops down below the lowest level, the circulation of the coolant in the cooling system might be bothered and consequently its efficiency might be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and trigger a leak that can also trigger the engine unit to break down.

Where to put the coolant in Bmw Serie 1?

We now proceed to the step that you are likely most keen on, where to put coolant in Bmw Serie 1? You are now conscious of the importance of always having the ideal level of this coolant. To find it is very very easy, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Bmw Serie 1:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly find the expansion tank that contains the coolant of your Bmw Serie 1, it is in most cases found in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Bmw Serie 1?

Now that you have identify where the coolant is in your Bmw Serie 1 , we will explain how to make the level of it. Nothing could be simpler, just adhere to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Verify on the side of the expansion tank of your Bmw Serie 1 the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is sufficient

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Softly add coolant to the expansion tank of your Bmw Serie 1 by checking regularly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine unit, and with a syringe, remove the excess coolant.

If the engine unit of your Bmw Serie 1 warms up despite a level coolant, read this article, you will be able to find the causes of this issue.

To find more tips on the Bmw Serie 1, take a look at the Bmw Serie 1 category.