In this article we’re going to discuss one more topic in the series on motor vehicle care. This is the coolant level, and specifically where to put coolant in Audi S3? To do this, we will start this content with a little reminder on the interest of ensuring of the coolant level of your motor vehicle, then, where to fill coolant in Audi S3? And, finally, how to make the level of this famous liquid.

put-coolant-audi-s3

Why to fill coolant level on a Audi S3?

Before we explain where the coolant is on a Audi S3, we start our content by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Audi S3 has a vital function in the good performing of your engine unit, in fact, it will circulate in it to catch the heat generated by its process and transfer it to your radiator which has the mission to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine unit would overheat after just a few minutes, and this would end result in engine unit failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops down below the lowest level, the circulation of the coolant in the cooling system might be bothered and therefore its effectiveness might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine unit to break down.

Where to put the coolant in Audi S3?

We now move on to the step that you are almost certainly most enthusiastic about, where to put coolant in Audi S3? You are now aware of the importance of constantly having the ideal level of this coolant. To find it is very very easy, here are the different steps to allow you to locate the expansion tank that contains the coolant of your Audi S3:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly find the expansion tank that contains the coolant of your Audi S3, it is usually located in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Audi S3?

Now that you have identify where the coolant is in your Audi S3 , we will explain how to produce the level of it. Nothing could be less complicated, just stick to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Audi S3 the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is good enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Softly add coolant to the expansion tank of your Audi S3 by checking frequently.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine unit, and with a syringe, remove the excess coolant.

If the engine unit of your Audi S3 warms up despite a level coolant, read this content, you will have the ability to find the causes of this problem.

If you have any additional questions about the Audi S3, do not hesitate to consult our Audi S3 category.