Modern cars are more and more equipped with technology and nevertheless this brings us comfort, we unfortunately also go through the down sides. The majority of us are not comfortable with anything electrical on our Suzuki Alto, let alone going near the fuses on it. In this article, we are going to try to help you to fix your fuse problems and specifically to find the power window fuse on your Suzuki Alto. To achieve this, first, we are going to see in which scenarios it can be important to replace the window fuse of your Suzuki Alto, then where the window fuse of your Suzuki Alto is.
Why replace the power window fuse on your Suzuki Alto?
So let’s start our content on the location of the window lifter fuse of your Suzuki Alto by the interest of changing it. You might have the impression that your fuse is blown but you are not sure. In truth, if you have problems with your motor vehicle window, whether it is stuck, or the power window of your Suzuki Alto no longer lifts , it is highly possible that the fuse is the cause. It is important to know that a fuse works as a safety device to avoid any overvoltage on your Suzuki Alto . It will be a resistor, of a filament, more or less thick, which will let pass a particular tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and examine that the filament is still intact with a basic visual check. In general, you will want to replace the fuse of the window lifter of an Suzuki Alto when the power window no longer functions . If your battery is working effectively, it may be the fuse that is the cause of your problem.
Where is the window winder fuse on Suzuki Alto?
We will now look for the fuse in the power window of your Suzuki Alto . It will often blow if your window gets stuck. The fuse is generally a 30 amp fuse. We will help you locate the power window fuse on your Suzuki Alto .
Position of the power window fuse of your Suzuki Alto
.
We will first concentrate on the power window fuse on your Suzuki Alto. For this you will have to go to the fuse box of your motor vehicle . If you can’t locate it, take note that it is close to your steering wheel, you will locate its exact location thanks to the manual of your Suzuki Alto.
- Read the manual on the cover of the fuse box to locate the window fuse on your Suzuki Alto , it should be noted as “power window”/”window lift control”.
- Remove the fuse in question carefully with pliers and check the condition of the filament.
- If it is faulty, replace it with a new fuse, otherwise you will have to check the state of your Suzuki Alto window lift motor, or the power cables.
- After you replace your motor vehicle window fuse, put it back together and test your windows.
How to handle it if the power window fuse on my Suzuki Alto blows after changing?
Finally, we will now see what to do if the window lift fuse of your Suzuki Alto is blown after replacement . Here are a few points to check yourself if you are able to do it, otherwise take your car to your garage.
- Remove your door trim
- Verify to see if your fuse blows once it is changed or when you operate your power window.
- If it blows without you handling it, look for a short in the beam that handles this fuse
- If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim
.
.
You now know how to find the window lift fuse of your motor vehicle , if you are trying to find other fuses like the starter fuse on Suzuki Alto, or the air conditioning fuse, don’t think twice to seek advice from our content articles dedicated to these fuses.
If you wish more guides on the Suzuki Alto, go to our Suzuki Alto category.
