Modern cars are more and more pre-loaded with technology and although this brings us comfort, we unfortunately as well suffer the down sides. The majority of us are uncomfortable with anything electrical on our Dacia Sandero, let alone going near the fuses on it. In this post, we are going to try to help you to fix your fuse problems and specifically to locate the power window fuse on your Dacia Sandero. To do this, first, we are going to find out in which scenarios it can be relevant to replace the window fuse of your Dacia Sandero, then where the window fuse of your Dacia Sandero is.
Why replace the power window fuse on your Dacia Sandero?
So let’s start our content page on the location of the window lifter fuse of your Dacia Sandero by the interest of changing it. You might have the impression that your fuse is blown but you are not sure. Obviously, if you have problems with your car window, if it is blocked, or the power window of your Dacia Sandero no longer lifts , it is strongly possible that the fuse is the cause. It is essential to know that a fuse works as a security device to avoid any overvoltage on your Dacia Sandero . It will be a resistor, of a filament, more or less thick, which will let pass a particular tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and check that the filament is still intact with a simple visual check. Generally, you will want to replace the fuse of the window lifter of an Dacia Sandero when the power window no longer works . If your battery is working properly, it might be the fuse that is the cause of your problem.
Where is the window winder fuse on Dacia Sandero?
We will now search for the fuse in the power window of your Dacia Sandero . It will frequently blow if your window gets stuck. The fuse is generally a 30 amp fuse. We will help you locate the power window fuse on your Dacia Sandero .
Location of the power window fuse of your Dacia Sandero
.
We will first focus on the power window fuse on your Dacia Sandero. For this you will have to go to the fuse box of your car . If you can’t locate it, please be aware that it is close to your steering wheel, you will locate its exact location thanks to the manual of your Dacia Sandero.
- Read the instruction manual on the cover of the fuse box to locate the window fuse on your Dacia Sandero , it should be noted as “power window”/”window lift control”.
- Take out the fuse in question carefully with pliers and check the condition of the filament.
- If it is defective, change it with a new fuse, in any other case you will have to check the state of your Dacia Sandero window lift motor, or the power cables.
- After you replace your car window fuse, put it back together and test your windows.
How to handle it if the power window fuse on my Dacia Sandero blows after changing?
Finally, we will now find out how to proceed if the window lift fuse of your Dacia Sandero is blown after replacement . Here are a few points to check yourself if you are able to do it, in any other case take your vehicle to your garage.
- Take out your door trim
- Verify to find out if your fuse blows once it is changed or when you operate your power window.
- If it blows without you handling it, look for a short in the beam that handles this fuse
- If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim
.
.
You now know how to find the window lift fuse of your car , if you are looking for other fuses like the starter fuse on Dacia Sandero, or the air conditioning fuse, don’t hesitate to consult our content articles dedicated to these fuses.
To find more tips on the Dacia Sandero, take a look at the Dacia Sandero category.
