When your car is running normally everything is fine, nevertheless if it begins to have regular complications you may begin to speculate, specifically if your car won’t start. In this article we will show you where the starter of a Ram P/U is, it will help you to solve your ignition complications. To do this, we will first describe the purpose of a starter, then, where is the starter on a Ram P/U , and, finally, how to replace the starter of a car.

find-starter-ram-p/u

Purpose of the starter on your Ram P/U

We begin this article by explaining the purpose of the starter motor on your Ram P/U. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is built from three main parts:

  • The Solenoid: This component is an electrical relay that will work as a switch, it will be activated by the key of your Ram P/U and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Most important element of your alternator, it is the one that will drive the flywheel of your Ram P/U and generate enough speed for your engine unit to begin.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to transfer the force from the starter to the engine.

Where is the starter on a Ram P/U?

Now that we have quickly explained what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter found on a Ram P/U? It is quite easy to find a starter, in truth, it is a large part that will almost constantly be situated in a similar place. We let you discover the two possible locations for your car starter down below.

Location of the starter on classic Ram P/U

First and most general case, where to find the starter of a Ram P/U with a conventional motor (implied without start and stop). The starter has a particular objective, to start the engine unit of your car, for that, it must constantly be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is found at the junction between your gearbox and your engine unit.

Location of the starter to Ram P/U with start and stop

And now second possible starter location of your Ram P/U . This case is much less frequent. It just relates to engines built with start and stop, and a good part of them will be equipped with a starter situated close to the flywheel. However, on some particular series or engines, the starter of your Ram P/U may be included in your alternator, it is then named a starter-alternator, to find it nothing easier, identify your accessory belt and you should see the big starter block.

How to replace the starter on a Ram P/U?

Finally, we’ll describe to you quite quickly how to replace the starter of a Ram P/U. This process is not actually complex, it can be considered by people who have a minimal of simple mechanical expertise and adapted tools. Adhere to down below the main steps to carry out this intervention:

  • Disconnect the battery on your Ram P/U, if you don’t know how to do it, don’t hesitate to consult our article which details how to do it without taking any risk.
  • After discovering your starter, loosen the fasteners that hold it in your engine unit block, there will usually be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Ram P/U, nevertheless before doing so we suggest you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may need to remove parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

If you need more tutorials on the Ram P/U, go to our Ram P/U category.