When your car is running normally everything is fine, however if it begins to have regular problems you may begin to wonder, especially if your motor vehicle won’t start. In this post we will show you where the starter of a Jeep Wrangler is, it will help you to resolve your ignition problems. To achieve this, we will first explain the purpose of a starter, then, where is the starter on a Jeep Wrangler , and, at last, how to change the starter of a motor vehicle.

find-starter-jeep-wrangler

Role of the starter on your Jeep Wrangler

We begin this content by explaining the purpose of the starter motor on your Jeep Wrangler. The starter is an electric motor which is powered by your battery, its job will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three main parts:

  • The Solenoid: This part is an electrical relay that will act as a switch, it will be activated by the key of your Jeep Wrangler and let the current from your battery to the engine of your alternator.

    • The engine: Main component of your alternator, it is the one that will drive the flywheel of your Jeep Wrangler and make enough speed for your engine to begin.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to transfer the force from the starter to the engine.

Where is the starter on a Jeep Wrangler?

Now that we have quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter found on a Jeep Wrangler? It is quite easy to discover a starter, indeed, it is a large part that will almost constantly be placed in a similar location. We let you discover the two possible locations for your motor vehicle starter down below.

Location of the starter on classic Jeep Wrangler

First and most basic case, where to discover the starter of a Jeep Wrangler with a conventional motor (implied without start and stop). The starter has a specific function, to start the engine of your motor vehicle, for that, it must constantly be near the engine flywheel of this one because it is the part that it actuates when it is used. The flywheel is found at the junction between your gearbox and your engine.

Location of the starter to Jeep Wrangler with start and stop

And now second possible starter location of your Jeep Wrangler . This case is much less frequent. It just relates to engines equipped with start and stop, and a good part of them will be equipped with a starter placed close to the flywheel. However, on some specific series or engines, the starter of your Jeep Wrangler may be built in in your alternator, it is then called a starter-alternator, to discover it nothing easier, locate your accessory belt and you should discover the big starter block.

How to change the starter on a Jeep Wrangler?

Finally, we’ll describe to you actually quite quickly how to change the starter of a Jeep Wrangler. This process is not actually complex, it can be considered by people who have a minimal of basic mechanical knowledge and adapted equipment. Follow down below the main steps to perform this intervention:

  • Disconnect the battery on your Jeep Wrangler, if you don’t know how to do it, don’t think twice to consult our content which points out how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine block, there will usually be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Jeep Wrangler, however before doing so we recommend you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may need to remove auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

To get more tips on the Jeep Wrangler, take a look at the Jeep Wrangler category.