When your car is running normally everything is fine, however if it starts to have frequent complications you may begin to question, especially if your car won’t start. In this post we will teach you where the starter of a Dodge Durango is, it will help you to fix your ignition complications. To get this done, we will first summarize the purpose of a starter, then, where is the starter on a Dodge Durango , and, finally, how to change the starter of a car.
Function of the starter on your Dodge Durango
We begin this article by detailing the purpose of the starter motor on your Dodge Durango. The starter is an electric motor which is powered by your battery, its role will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three most important parts:
- The Solenoid: This component is an electrical relay that will work as a switch, it will be activated by the key of your Dodge Durango and let the current from your battery to the engine unit of your alternator.
- The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to transmit the force from the starter to the engine.
The engine unit: Most important component of your alternator, it is the one that will drive the flywheel of your Dodge Durango and make enough speed for your engine unit to begin.
Where is the starter on a Dodge Durango?
Now that we have fairly quickly detailed what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter based on a Dodge Durango? It is quite easy to find a starter, in actual fact, it is a large part that will almost constantly be placed in a similar place. We let you see the two possible places for your car starter below.
Location of the starter on traditional Dodge Durango
First and most general case, where to find the starter of a Dodge Durango with a conventional motor (implied without start and stop). The starter has a particular action, to start the engine unit of your car, for that, it must constantly be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine unit.
Location of the starter to Dodge Durango with start and stop
And now second possible starter location of your Dodge Durango . This case is much less frequent. It just relates to engines fitted with start and stop, and a good part of them will be equipped with a starter placed close to the flywheel. However, on some particular series or engines, the starter of your Dodge Durango might be built in in your alternator, it is then called a starter-alternator, to find it nothing easier, locate your accessory belt and you should see the big starter block.
How to change the starter on a Dodge Durango?
Finally, we’ll explain to you actually quite fairly quickly how to change the starter of a Dodge Durango. This procedure is not necessarily difficult, it can be considered by people who have a minimum of basic mechanical experience and adapted tools. Follow below the most important steps to perform this intervention:
- Disconnect the battery on your Dodge Durango, if you don’t know how to do it, don’t hesitate to seek advice from our article which details how to do it without taking any risk.
- After finding your starter, loosen the fasteners that hold it in your engine unit block, there will usually be 2 or 3
- It will be time to disconnect the power cables from the starter motor of your Dodge Durango, however before doing so we recommend you to take a picture of the installation to avoid making a mistake when reassembling.
- It’s possible that to take out it you may need to take out auto parts like the gimbal.
- Remount the new starter, being careful when connecting the connectors.
- Reconnect your battery and test your starter.
.
To get more tips on the Dodge Durango, take a look at the Dodge Durango category.
