When your car is running normally everything is fine, however if it begins to have frequent complications you may start to speculate, specifically if your car won’t start. In this post we will show you where the starter of a Audi Sq7 is, it will help you to resolve your ignition complications. To do this, we will first describe the role of a starter, then, where is the starter on a Audi Sq7 , and, finally, how to change the starter of a car.

find-starter-audi-sq7

Purpose of the starter on your Audi Sq7

We start this content page by detailing the role of the starter motor on your Audi Sq7. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is built from three most important parts:

  • The Solenoid: This component is an electrical relay that will act as a switch, it will be activated by the key of your Audi Sq7 and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Most important component of your alternator, it is the one that will drive the flywheel of your Audi Sq7 and create enough speed for your engine unit to start.

  • The engagement pinion: This is the last part of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to send the force from the starter to the engine.

Where is the starter on a Audi Sq7?

Now that we have fairly quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter based on a Audi Sq7? It is quite easy to discover a starter, in fact, it is a large part that will almost always be placed in a similar place. We let you see the two possible locations for your car starter down below.

Location of the starter on classic Audi Sq7

First and most basic case, where to discover the starter of a Audi Sq7 with a conventional motor (implied without start and stop). The starter has a particular action, to start the engine unit of your car, for that, it must always be near the engine unit flywheel of this one because it is the part that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine unit.

Location of the starter to Audi Sq7 with start and stop

And now second possible starter location of your Audi Sq7 . This case is much less frequent. It only concerns engines fitted with start and stop, and a good part of them will be equipped with a starter placed close to the flywheel. However, on some particular series or engines, the starter of your Audi Sq7 might be built in in your alternator, it is then known as a starter-alternator, to discover it nothing much easier, identify your accessory belt and you should discover the big starter block.

How to change the starter on a Audi Sq7?

Finally, we’ll explain to you actually quite fairly quickly how to change the starter of a Audi Sq7. This process is not actually difficult, it can be considered by people who have a minimum of basic mechanical experience and adapted equipment. Adhere to down below the most important steps to carry out this intervention:

  • Disconnect the battery on your Audi Sq7, if you don’t know how to do it, don’t hesitate to seek advice from our content page which details how to do it without taking any risk.
  • After finding your starter, loosen the fasteners that hold it in your engine unit block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Audi Sq7, however before doing so we advise you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may need to remove auto parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

Whenever you have any additional questions about the Audi Sq7, do not hesitate to consult our Audi Sq7 category.