When your car is running normally everything is fine, however if it begins to have regular complications you may start to wonder, specifically if your car won’t start. In this article we will learn you where the starter of a Audi Rs4 is, it will help you to fix your ignition complications. To get this done, we will first illustrate the function of a starter, then, where is the starter on a Audi Rs4 , and, finally, how to change the starter of a car.

find-starter-audi-rs4

Function of the starter on your Audi Rs4

We start this article by detailing the function of the starter motor on your Audi Rs4. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is built from three most important parts:

  • The Solenoid: This part is an electrical relay that will action as a switch, it will be activated by the key of your Audi Rs4 and let the current from your battery to the engine of your alternator.

    • The engine: Most important element of your alternator, it is the one that will drive the flywheel of your Audi Rs4 and generate enough speed for your engine to start.

  • The engagement pinion: This is the last component of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to transfer the force from the starter to the engine.

Where is the starter on a Audi Rs4?

Now that we have quickly described what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter based on a Audi Rs4? It is quite easy to locate a starter, in fact, it is a large component that will almost always be positioned in a similar place. We let you see the two possible locations for your car starter down below.

Location of the starter on classic Audi Rs4

First and most basic case, where to locate the starter of a Audi Rs4 with a conventional motor (implied without start and stop). The starter has a particular objective, to start the engine of your car, for that, it must always be near the engine flywheel of this one because it is the component that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine.

Location of the starter to Audi Rs4 with start and stop

And now second possible starter location of your Audi Rs4 . This case is much less frequent. It just is about engines built with start and stop, and a good component of them will be equipped with a starter positioned close to the flywheel. Nevertheless, on some particular series or engines, the starter of your Audi Rs4 might be included in your alternator, it is then called a starter-alternator, to locate it nothing much easier, identify your accessory belt and you should discover the big starter block.

How to change the starter on a Audi Rs4?

Finally, we’ll show you to you actually quite quickly how to change the starter of a Audi Rs4. This procedure is not actually difficult, it can be considered by people who have a minimum of basic mechanical knowledge and adapted equipment. Follow down below the most important steps to carry out this intervention:

  • Disconnect the battery on your Audi Rs4, if you don’t know how to do it, don’t think twice to consult our article which explains how to do it without taking any risk.
  • After locating your starter, loosen the fasteners that hold it in your engine block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Audi Rs4, however before doing so we suggest you to take a picture of the installation to avoid making a mistake when reassembling.
  • It’s possible that to remove it you may need to remove parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

To discover more tips on the Audi Rs4, take a look at the Audi Rs4 category.