Modern vehicles are more and more loaded with technology and nevertheless this brings us comfort, we unfortunately as well suffer the negatives. Many of us are not convenient with anything electrical on our Jeep Wrangler, even morehandling the fuses on it. In this post, we will try to help you to solve your fuse problems and especially to find the fuse of the horn on your Jeep Wrangler. To do this, first, we will see in which situations it can be important to change the fuse of the horn of your Jeep Wrangler, then where is the fuse of the horn of your Jeep Wrangler .

find-horn-fuse-jeep-wrangler

Why change the horn fuse to Jeep Wrangler?

.
So let’s start our article on the location of the horn fuse of your Jeep Wrangler by the interest of changing it. You may possibly have the impression that your fuse is blown but you are not sure. If you can no longer use your car horn, it is extremely possible that the fuse is the trigger. It is important to know that a fuse acts as a security device to avoid overvoltage on your Jeep Wrangler . It will be a resistor, of a filament, more or less thick, which will let complete a certain tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a simple visual control. In general, one will want to change the fuse of the horn of a Jeep Wrangler when it will no longer work for no apparent reason . If your battery is functioning properly, it might be the fuse that is producing your problem.

Where is the horn fuse on Jeep Wrangler?

We will now seek out the location of the horn fuse on your Jeep Wrangler . The fuse is generally a 15 amp blue fuse. However, there is a fuse and a relay that controls the correct operation of your horn. We will take it in turns to help you discover the fuse for your Jeep Wrangler horn.

Change the fuse inside the horn of your Jeep Wrangler

.
We will first focus on the inner fuse of the horn of your Jeep Wrangler. For this you will have to go to the fuse box of your car . If you can’t discover it, know that it is close to your steering wheel, you will discover its exact location thanks to the instruction manual of your Jeep Wrangler.

  • Go through the instruction manual on the cover of the fuse box to discover the fuse of the horn of your Jeep Wrangler , it should be noted as “horn”.
  • Remove the fuse from the horn attentively with pliers and check the condition of the filament.
  • If it’s faulty, replace it with a new fuse, otherwise skip to the last part of this article and check your horn. As a last remedy, you can take your vehicle to your technician so that he can take a closer look at the trigger of your problem.
  • After you change the fuse on your car horn, reassemble and test your horn.

Changing the horn fuse relay on your Jeep Wrangler

At last, we will now see how to check the status of the horn relay in your car. To do this, you will need to go to your engine unit compartment side:

  • Open the fuse box of your Jeep Wrangler, it’s close to your battery under a plastic cover.
  • Check the inside of the cache for the location of the horn relay, or your instruction manuals if you can’t discover it.
  • Reverse the relay with another relay to test your horn, or replace it with a new one

You now know how to discover the fuse of your car horn , if you are looking for other fuses like the starter fuse on Jeep Wrangler, or the car radio fuse Jeep Wrangler, do not think twice to consult our articles dedicated to these fuses.

If you need more guides on the Jeep Wrangler, go to our Jeep Wrangler category.