The safety of a motor vehicle is essential. Even if the Toyota Yaris are economic holes, certain maintenance actions are crucial. In this article we will explain to you when to replace the brake discs of your Toyota Yaris? To achieve this, to begin with, we will discover what the brake discs of your car are used for, then, when to replace the brake discs of your Toyota Yaris, and, finally, how to change them with new ones.
Interest of the brake discs of a Toyota Yaris
We start our article by detailing what the brake discs of a Toyota Yaris are used for, it will enable you to figure out why it is important to be certain that they are always in good working order.
Brake discs are the main part of your braking system. Indeed, braking on an Toyota Yaris is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will bring about your Toyota Yaris to brake.
When to replace the brake discs of a Toyota Yaris?
We will now move on to the section that undoubtedly attracts you to this content, namely, when replacing the brake discs of a Toyota Yaris? How we explained it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing auto parts and they will, with time and especially the friction when braking wears out and loses braking power. We will now outline the different methods to know when to change them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Toyota Yaris , however it is important to know that dependent on your driving style and the type of journey this can vary substantially. Indeed, if you mainly drive on the motorway and your brakes are only slightly used, this value can increase, alternatively, if you only drive in built-up areas, it can decrease.
- A simple and effective way to find out the state of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A simple visual way to know when to replace the brake discs on your Toyota Yaris is to remove the wheels after the vehicle has been set on stands. Once taken off, you will be able to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Toyota Yaris?
Finally, to conclude this content we will fairly quickly explain how to replace the brake discs of your Toyota Yaris. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Toyota Yaris, don’t hesitate to consult our content which teaches you how to make this replace.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Toyota Yaris on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
Whenever you have any additional questions about the Toyota Yaris, do not hesitate to consult our Toyota Yaris category.
