The safety of a motor vehicle is very important. Whether or not the Toyota Tundra are economic holes, certain routine service works are essential. In this article we will explain to you when to replace the brake discs of your Toyota Tundra? To do this, to begin with, we will discover what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Toyota Tundra, and, finally, how to change them with new ones.

change-brake-discs-toyota-tundra

Interest of the brake discs of a Toyota Tundra

We start our article by detailing what the brake discs of a Toyota Tundra are used for, it will allow you to understand why it is important to be sure that they are constantly in good functioning order.
Brake discs are the main component of your braking system. Obviously, braking on an Toyota Tundra is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will bring about your Toyota Tundra to brake.

When to replace the brake discs of a Toyota Tundra?

We will now move on to the section that certainly attracts you to this content page, namely, when changing the brake discs of a Toyota Tundra? How we explained it to you just before, the brake discs and pads work in osmosis, however these two components are wearing auto parts and they will, over time and specifically the friction when braking wears out and loses braking power. We will now highlight the different methods to know when to change them:

  • We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Toyota Tundra , however it is important to know that depending on your driving style and the type of journey this can vary substantially. In fact, if you mainly drive on the motorway and your brakes are just slightly used, this amount can increase, conversely, if you just drive in built-up areas, it can decrease.
  • A basic and successful method to identify the state of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A simple visual method to know when to replace the brake discs on your Toyota Tundra is to remove the wheels after the vehicle has been set on stands. Once removed, you will have the ability to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Toyota Tundra?

Finally, to conclude this content page we will quickly explain how to replace the brake discs of your Toyota Tundra. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Toyota Tundra, don’t think twice to consult our content page which teaches you how to make this replace.
As far as changing discs is concerned, here are the main steps to stick to:

  • Put your Toyota Tundra on stands, take off the wheels you want to work on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
  • Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.

If you wish more tutorials on the Toyota Tundra, go to our Toyota Tundra category.