The safety of a car is paramount. Regardless if the Hyundai Ix20 are financial holes, certain routine service actions are fundamental. Today we will explain to you when to change the brake discs of your Hyundai Ix20? To accomplish this, first of all, we will discover what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Hyundai Ix20, and, finally, how to change them with new ones.
Benefit of the brake discs of a Hyundai Ix20
We start our article by detailing what the brake discs of a Hyundai Ix20 are used for, it will allow you to discover why it is important to make sure that they are always in good working order.
Brake discs are the main component of your braking system. In actual fact, braking on an Hyundai Ix20 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will trigger your Hyundai Ix20 to brake.
When to change the brake discs of a Hyundai Ix20?
We will now proceed to the part that undoubtedly attracts you to this content, namely, when replacing the brake discs of a Hyundai Ix20? How we mentioned it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, with time and especially the friction when braking wears out and loses braking power. We will now highlight the different ways to know when to change them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Hyundai Ix20 , however it is important to know that dependent on your driving style and the type of journey this can vary considerably. In truth, if you principally drive on the motorway and your brakes are only slightly used, this value can increase, alternatively, if you only drive in built-up areas, it can decrease.
- A simple and good way to identify the state of the brake discs on your car is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A simple visual way to know when to change the brake discs on your Hyundai Ix20 is to remove the wheels after the vehicle has been set on stands. Once removed, you will be able to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Hyundai Ix20?
Finally, to conclude this content we will quickly explain how to change the brake discs of your Hyundai Ix20. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Hyundai Ix20, don’t hesitate to consult our content which teaches you how to make this change.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Hyundai Ix20 on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, remove the two nuts that lock the upper component of your brake caliper, remove it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
To discover more tips on the Hyundai Ix20, take a look at the Hyundai Ix20 category.
