The safety of a motor vehicle is important. Even if the Genesis G80 are financial holes, certain maintenance acts are fundamental. Today we will explain to you when to replace the brake discs of your Genesis G80? To do this, first of all, we will discover what the brake discs of your car are used for, then, when to replace the brake discs of your Genesis G80, and, finally, how to change them with new ones.
Benefit of the brake discs of a Genesis G80
We start our guideline by explaining what the brake discs of a Genesis G80 are used for, it will enable you to understand why it is essential to be sure that they are always in good functioning conditions.
Brake discs are the main part of your braking system. Indeed, braking on an Genesis G80 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will bring about your Genesis G80 to brake.
When to replace the brake discs of a Genesis G80?
We will now proceed to the section that undoubtedly attracts you to this content page, namely, when changing the brake discs of a Genesis G80? How we described it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing parts and they will, as time passes and especially the friction when braking wears out and loses braking power. We will now detail the different ways to know when to change them:
- We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Genesis G80 , nevertheless it is essential to know that dependent on your driving style and the type of journey this can change significantly. In truth, if you mainly drive on the motorway and your brakes are only slightly used, this value can increase, in contrast, if you only drive in built-up areas, it can reduce.
- A basic and effective way to find out the condition of the brake discs on your motor vehicle is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A basic visual way to know when to replace the brake discs on your Genesis G80 is to remove the wheels after the car has been set on stands. Once taken out, you will have the ability to access your discs and verify their condition. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Genesis G80?
Finally, to conclude this content page we will quickly describe how to replace the brake discs of your Genesis G80. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Genesis G80, don’t think twice to seek advice from our content page which exposes you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Genesis G80 on stands, take off the wheels you want to work on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you have any additional questions about the Genesis G80, do not hesitate to consult our Genesis G80 category.
