The safety of a motor vehicle is paramount. Even if the Acura MDX are financial holes, certain maintenance actions are fundamental. In this article we will explain to you when to change the brake discs of your Acura MDX? To get this done, to begin with, we will find out what the brake discs of your car are used for, then, when to change the brake discs of your Acura MDX, and, finally, how to replace them with new ones.
Benefit of the brake discs of a Acura MDX
We start our article content by explaining what the brake discs of a Acura MDX are used for, it will allow you to figure out why it is essential to ensure that they are constantly in good working conditions.
Brake discs are the main part of your braking system. In truth, braking on an Acura MDX is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will bring about your Acura MDX to brake.
When to change the brake discs of a Acura MDX?
We will now proceed to the section that most certainly attracts you to this article, namely, when replacing the brake discs of a Acura MDX? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, after some time and specifically the friction when braking wears out and loses braking power. We will now detail the different techniques to know when to replace them:
- We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Acura MDX , however it is essential to know that based on your driving style and the type of journey this can change substantially. Indeed, if you mainly drive on the motorway and your brakes are only slightly used, this value can increase, alternatively, if you only drive in built-up areas, it can reduce.
- A simple and powerful method to identify the condition of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual method to know when to change the brake discs on your Acura MDX is to remove the wheels after the car has been set on stands. Once taken off, you will be able to access your discs and check their condition. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Acura MDX?
Finally, to end this article we will quickly show you how to change the brake discs of your Acura MDX. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Acura MDX, don’t hesitate to consult our article which points out you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Acura MDX on stands, take off the wheels you want to work on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you want more tutorials on the Acura MDX, go to our Acura MDX category.
