Today we are going to examine a problem that may prove to be unsafe. If you detect any handling or grip problems on your Jeep Wrangler , it is necessary that you drive attentively and manage it fairly quickly. Our team has created this article to help you solve them. First, we’ll fairly quickly check out the principal parts that assure effective road handling, then we’ll check out why your Jeep Wrangler doesn’t hold the road any more, and at last we’ll check out how to solve your grip problems.

problem-road-handling-jeep-wrangler

What are the main elements that assure good road holding and handling on a Jeep Wrangler?

We commence this content page by fairly quickly detailing the main parts that will guarantee good road holding for your Jeep Wrangler. It’s necessary to know that a vehicle’s grip is a science in itself. It will therefore rely upon many points, we will show you down below the main ones that can be affected:

  • Shock absorbers: The main parts of your road handling, they perpetually guarantee the contact between the wheels and the road. They absorb all shocks and holes on the road.
  • Tyres: They are the ones that will guarantee the grip of your Jeep Wrangler on the road, the softer they are, the more grip you have, but the faster they get damaged, the harder they are, the less grip you have, but the more resistant they are. Temperature influences their wear. Their size will as well play on grip, the wider they are the more contact with the ground will be important.
  • The center of gravity: The higher your car is going to be, the more it will lean in the corners and consequently lose handling, that’s why low profile sports cars grip better than very high 4×4’s
  • Wheel Alignment: This adjustment allows you to control the vertical angle of your car’s wheels, it is consequently essential for the grip of your car and the wear of your tires. This adjustment is very precise and must be accomplished by professionals.

.
There are many other parts to take into consideration such as wheelbase, ground clearance, chassis rigidity, weight and aerodynamics…

Why is my Jeep Wrangler having problems with my car’s handling or grip?

We will now proceed to the component that concerns you the most, why my Jeep Wrangler has handling problems? As we described earlier, there are quite a lot of elements to take into consideration for your car to have a good grip, nevertheless there are few that can evolve with time, most of them are intrinsic to the construction of the car, we will see right away those that can affect your handling and road, and, why:

  • As we outlined earlier, the rubber of the tyres has a crucial function in the good road holding of your car, if your tyres are dead, you might have problems of road holding on wet road at first and when you reach the “cord” even on dry road.
  • Dead shock absorbers: If your shock absorbers are dead, your car will no longer have the ability to absorb the irregularities of the road properly and it will often “float”, which will result in a bad distribution of the masses on the car and shift the centre of gravity of the car. You risk slipping in the bends.
  • The risk with a misalignment is that your ground contact area is reduced because of a too open or too closed wheel angle, you will have grip problems.
  • A steering problem: Last but not least, the last essential element for good road handling is that all the elements of your steering must be in good condition. The most classic case is that your stabilizer bar or the silent blocks of your steering triangles are dead. The consequence will be a delay in your changes of way.

How do you solve the handling problems?

We now proceed to the different solutions to resolve your road holding problems on your Jeep Wrangler .

  • Tyres: Nothing could be simpler, just change your tyres, make sure to verify them attentively and change them when you get to the visual indicator in the grooves of your tyres. It is generally required to count between 100 and 200 euros for a pair of tires.
  • Shock absorbers: Ditto, dead shock absorbers have to be changed, if you want to know when to change the shock absorbers of a Jeep Wrangler, please have a check out our content page on this theme. The price can vary quite a lot, but you will have to count at least 400€
  • Wheel alignment: You will have to go to your garage area to have it solved, it will cost you less than 100€?
  • Steering: If you have problems with the handling on Jeep Wrangler because of your steering, there might be several elements involved, in this case you will have to make a whole check-up of these elements, the best is to call a specialist.

If perhaps you have any additional questions about the Jeep Wrangler, do not hesitate to consult our Jeep Wrangler category.