Today we are going to examine a issue that may prove to be threatening. If you detect any handling or grip problems on your Hyundai Veloster , it is essential that you drive carefully and take care of it fairly quickly. Our team has made this guideline to help you fix them. First, we’ll fairly quickly check out the principal parts that assure good road handling, then we’ll check out why your Hyundai Veloster doesn’t hold the road any more, and at last we’ll check out how to fix your grip complications.

problem-road-handling-hyundai-veloster

What are the main components that assure great road holding and handling on a Hyundai Veloster?

We begin this content by fairly quickly telling you the main parts that will ensure good road holding for your Hyundai Veloster. It’s essential to know that a vehicle’s grip is a science in itself. It will as a result rely upon many elements, we will show you below the main ones that can be affected:

  • Shock absorbers: The main parts of your road handling, they perpetually ensure the contact between the wheels and the road. They absorb all shocks and holes on the road.
  • Tyres: They are the ones that will ensure the grip of your Hyundai Veloster on the road, the softer they are, the more grip you have, but the faster they get damaged, the harder they are, the less grip you have, but the more resistant they are. Temperature affects their wear. Their size will as well play on grip, the wider they are the more contact with the ground will be important.
  • The center of gravity: The higher your car is going to be, the more it will lean in the corners and consequently lose handling, that’s why low profile sports vehicles grip better than very high 4×4’s
  • Wheel Alignment: This adjustment allows you to control the vertical angle of your car’s wheels, it is consequently important for the grip of your motor vehicle and the wear of your tires. This adjustment is very particular and must be done by specialists.

.
There are many other parts to take into consideration such as wheelbase, ground clearance, chassis rigidity, weight and aerodynamics…

Why is my Hyundai Veloster having complications with my car’s handling or grip?

We will now proceed to the part that concerns you the most, why my Hyundai Veloster has handling complications? As we described above, there are a lot of components to take into consideration for your car to have a good grip, nevertheless there are few that can evolve over time, most of them are intrinsic to the construction of the car, we will find out right away those that can bother your handling and road, and, why:

  • As we outlined above, the rubber of the tyres has a fundamental function in the good road holding of your motor vehicle, if your tyres are dead, you might have complications of road holding on wet road at first and when you reach the “cord” even on dry road.
  • Dead shock absorbers: If your shock absorbers are dead, your motor vehicle will no longer have the ability to absorb the irregularities of the road effectively and it will tend to “float”, which will end result in a bad distribution of the masses on the vehicle and shift the centre of gravity of the vehicle. You risk slipping in the bends.
  • The risk with a misalignment is that your ground contact area is reduced due to a too open or too closed wheel angle, you will have grip complications.
  • A steering issue: Last but not least, the last important element for good road handling is that all the components of your steering must be in good state. The most classic case is that your stabilizer bar or the silent blocks of your steering triangles are dead. The result will be a delay in your changes of direction.

How do you fix the handling complications?

We now proceed to the different solutions to resolve your road holding complications on your Hyundai Veloster .

  • Tyres: Nothing could be easier, just change your tyres, remember to check them carefully and change them when you get to the visual indicator in the grooves of your tyres. It is generally required to count between 100 and 200 euros for a pair of tires.
  • Shock absorbers: Ditto, dead shock absorbers have to be changed, if you want to know when to change the shock absorbers of a Hyundai Veloster, please have a check out our content on this subject. The price can vary a lot, but you will have to count at least 400€
  • Wheel alignment: You will have to go to your garage to have it fixed, it will cost you less than 100€?
  • Steering: If you have complications with the handling on Hyundai Veloster due to your steering, there may be several components involved, in this case you will have to produce a whole check-up of these components, the best is to call a professional.

To get more tips on the Hyundai Veloster, take a look at the Hyundai Veloster category.