Learning to drive a car is not always convenient, and often it may seem like a good solution to choose an automatic Ford Fusion, if it’s for basic comfort or ease of use, this kind of transmission is becoming more and more wide-spread. However, while they may seem like the best solution, there may possibly as well be problems with the automatic gearboxes of your Ford Fusion . This is precisely the subject of our content. First, we’ll briefly describe the different types of automatic gearboxes, then, in a second step, which problems you may possibly face with the gearbox of your Ford Fusion , and, finally, how to solve them.

problem-automatic-transmission-ford-fusion

The different types of automatic gearbox of a Ford Fusion

.
Gearboxes have the benefit of being known to be solid, as you don’t need to use your clutch pedal and every thing is electronically and mechanically handled there will be no early wear of your clutch or other elements that could be put to the test by misuse on your part.
However, depending on the kind of automatic transmission your Ford Fusion is equipped with you will have more or less reliability, we will expose them to you now:

  • Common automatic gearbox: It will use a torque converter, which will manage the gear changes, it’s the oldest technology, it has evolved quite a lot in the last decades (more gears and a better management of the gear changes).
  • Robotized automatic gearbox: This is a manual gearbox with a robotized system that will replace the driver’s action. This kind of gearbox is less and less basic because they are thought to be very slow. We as well often feel a coupling during deceleration.
  • Dual-clutch automatic transmission: This is the greatest automatic transmission, it works on the same principle as the robotic transmission, but thanks to its dual clutch, you won’t have any more problems with slow speeds or elevated fuel consumption. They are often fitted on luxury models.
  • Continuously variable automatic box: It is the same concept as on a scooter, a variator will come to control the differences between acceleration and motor speed, they are especially slow and often be unresponsive during the acceleration phases of your Ford Fusion.

.

I’m having problems with the automatic transmission on my Ford Fusion

We now begin the part that surely attracts you the most in this post, what are the problems you may encounter with the automatic transmission of your Ford Fusion? As outlined above, generally speaking they are more reliable than manual transmissions, however, here are the most important problems you may face:

  • As explained above, no matter what kind of automatic gearbox, they are often known to be slow and have inertia when accelerating. However, this phenomenon is designed to happen just when the vehicle is started, not when it is launched. If it feels like it happens all the time, the clutch or converter is most certainly dead.
  • I have the feeling that a gear in the automatic transmission of my Ford Fusion no longer shifts or jumps: If you have the feeling that your gears no longer shift or often jump on your Ford Fusion, there is a part that is most likely responsible for this failure. Obviously, the solenoid that works as a “switch” to engage the gears must not be working properly, second option, a speed or engine speed sensor may be faulty and send the wrong information to your gearbox.
  • If you feel drops coming from the automatic gearbox of your Ford Fusion: If you feel a clutch when you go up or when you slow down, it is either your oil which is too old and which does not lubricate any more adequately all the mechanisms of your gearbox, or else a sensor which gives bad information

    • .

  • My Ford Fusion’s automatic transmission is leaking: Finally, if your Ford Fusion’s automatic transmission is leaking, it’s most probably one of your spy seals is too worn.

How do I fix automatic transmission problems on a Ford Fusion?

And finally, we’re going to try to give you the strategies to fix the automatic transmission problems on your Ford Fusion . Find them just below:

  • Oil leak on the automatic gearbox of a Ford Fusion: Find the origin of the leak, and replace the concerned gasket, get it conducted by a professional, opening a gearbox is not easy. It will cost you a few hundred euros, especially for the labour. Do not hesitate to read our content on gearbox oil leaks on Ford Fusion.
  • Sensor issue: No matter which sensor is involved, a replacement is the just remedy, sensors do not repair themselves, you should count from 100 to a few hundred euros depending on the difficulty of access to the one that concerns you.
  • Couplings: If you have problems with the couplings on your Ford Fusion, you will only need to do a whole gearbox change to gain comfort and preserve your gears.
  • The automatic gearbox of my Ford Fusion slips: In this case, you clearly have a dead clutch disc, you will have to change the clutch, and on some models you won’t be able to change it without doing a standard exchange of the gearbox, be prepared to spend more than a thousand euros.

There are other automatic transmission problems on Ford Fusion, such as electronic problems or pressure problems, but this list lists the most important ones, no matter the reason, for such difficult mechanisms. As soon as you feel a problem on this level, we advise you to go fairly quickly to your mechanic.

If perhaps you have any additional questions about the Ford Fusion, do not hesitate to consult our Ford Fusion category.