Driving a vehicle is a daily activity for most of us, our paths are not always safe, and it doesn’t matter if it’s raining, windy or snowing, we often have no choice but to take our Mazda 6. Not being able to act on traffic conditions, we try to have at minimum a safe car! If you are not comfortable, if you have the impression that your Mazda 6 is pulling to the left, then you are on the good page. Our team made the decision to write this article to help you uncover the origin of this problem and quickly feel safe behind the wheel of your car. To achieve this, we will initially look into the triggers of a Mazda 6 that pulls to the left without vibration and to conclude, a car that pulls to the left with vibration.
Mazda 6 that pulls to the left without vibration
Mazda 6 pulling to the left because of the alignment
Let’s commence with the circumstance of your Mazda 6 which pulls to the left without vibration, one of the most common origins of a non-straight trajectory on a car is the alignment , the reality is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is normally completed when you replace your tires. Despite the fact it is hard or even impossible to know the state of your alignment, you can look at the sidewalls of your tires, if you detect abnormal wear on your Mazda 6, it is most likely that the alignment is at fault. In this case, go to your service garage or tyre specialist to resolve it.
Mazda 6 pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only trigger for a car that pulls to the left. In reality, if you have a difference in pressure on your tires, it is obvious that your Mazda 6 is no longer a stable steering. So be sure you verify the pressure of all four tyres. Furthermore to the risk of an accident if you encounter your Mazda 6 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a result, you will have to replace them more quickly.
My Mazda 6 is pulling to the left and I encounter vibrations:
Mazda 6 pulling to the left because of the silent blocks
Now let’s look at the case of a Mazda 6 that pulls to the left but also triggers vibrations in the steering wheel. The first known justification of trajectory error plus vibration is that your silent blocks are dead. In reality, when they are too damaged, they not anymore assume their purpose of shock absorber and binder between the different elements of your front drivetrain, which creates a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Mazda 6 pulls to the left. Check their state and replace them if needed. In the event that you want more info on problems with the silent blocks, please examine our particular article.
My Mazda 6 pulls to the left because of the bearings
Another possibility that your Mazda 6 pulls to the left is that one of your bearings, commonly the front one, is dead, you should, moreover to the trajectory deficiency, encounter a notable vibration or rolling noise. In reality, when bearings are damaged, they no more rotate as well and slow down the rotation of the wheel on which they are installed, which certainly creates a trajectory deficiency. Check their state and have them replaced if needed.
My Mazda 6 pulls to the left because of the shock absorbers
Last but not least, your Mazda 6 that pulls to the left and makes vibrations because of the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every deficiency related to the shock absorbers can disturb the natural behaviour of the Mazda 6. You should, however, encounter a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked and ask your repair shop for a replacement if needed.
If you need more guides on the Mazda 6, go to our Mazda 6 category.
