Driving a vehicle is a daily activity for many of us, our paths are not always secure, and no matter it’s raining, windy or snowing, we frequently have no choice but to take our Lancia Ypsilon. Not having the ability to act on traffic conditions, we try to have at least a safe automobile! If you are not secure, if you have the feeling that your Lancia Ypsilon is pulling to the left, then you are in the good. All of us decided to prepare this content to help you discover the source of this issue and quickly feel safe behind the wheel of your car. To make this happen, we will initially check out the causes of a Lancia Ypsilon that pulls to the left without vibration and to conclude, a car that pulls to the left with vibration.
Lancia Ypsilon that pulls to the left without vibration
Lancia Ypsilon pulling to the left because of the alignment
Let’s begin with the case of your Lancia Ypsilon which pulls to the left without vibration, one of the most typical roots of a non-straight trajectory on a automobile is the alignment , the truth is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is mostly carried out when you replace your tires. Even though it is tricky or even impossible to know the state of your alignment, you can look at the sidewalls of your tires, if you detect abnormal wear on your Lancia Ypsilon, it is likely that the alignment is at fault. In this case, go to your service garage or tyre expert to solve it.
Lancia Ypsilon pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only reason for a car that pulls to the left. Actually, if you have a difference in pressure on your tires, it is rational that your Lancia Ypsilon is no longer a stable steering. Therefore remember to examine the pressure of all four tyres. Furthermore to the risk of an ıncident if you encounter your Lancia Ypsilon pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a result, you will have to replace them more quickly.
My Lancia Ypsilon is pulling to the left and I encounter vibrations:
Lancia Ypsilon pulling to the left because of the silent blocks
Now let’s look at the case of a Lancia Ypsilon that pulls to the left but also causes vibrations in the steering wheel. The first basic trigger of trajectory error plus vibration is that your silent blocks are dead. Actually, when they are too worn, they not anymore manage their task of shock absorber and binder between the different units of your front drivetrain, which creates a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Lancia Ypsilon pulls to the left. Examine their state and replace them if necessary. In the event that you would like more info on concerns with the silent blocks, please go through our particular content.
My Lancia Ypsilon pulls to the left due to the bearings
Another possibility that your Lancia Ypsilon pulls to the left is that one of your bearings, generally the front one, is dead, you should, in addition to the trajectory problem, experience a singular vibration or rolling noise. Actually, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably creates a trajectory problem. Examine their state and have them replaced if needed.
My Lancia Ypsilon pulls to the left due to the shock absorbers
Last but not least, your Lancia Ypsilon that pulls to the left and produces vibrations due to the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every problem relevant to the shock absorbers can disrupt the common behaviour of the Lancia Ypsilon. You should, nevertheless, undergo a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked out and ask your mechanic for a replacement if needed.
To discover more tips on the Lancia Ypsilon, take a look at the Lancia Ypsilon category.
