Driving is a daily activity for a lot of people, our roads are not necessarily secure, and regardless whether it’s raining, windy or snowing, we frequently have no choice but to take our Fiat Panda 3. Not being able to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not relaxed, if you have the impression that your Fiat Panda 3 is pulling to the right, then you are on the good website. We made the decision to create this content page to help you find the source of this issue and as soon as possible feel safe behind the wheel of your car. To achieve this, we will first look into the triggers of a Fiat Panda 3 that pulls to the right without vibration and finally, a car that pulls to the right with vibration.
Fiat Panda 3 that pulls to the right without vibration
Fiat Panda 3 pulling to the right because of the alignment
Let’s start with the case of your Fiat Panda 3 which pulls to the right without vibration, one of the most typical origins of a non-straight trajectory on a vehicle is the alignment , the truth is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is generally completed when you change your tires. Nevertheless it is tricky or even impossible to know the condition of your alignment, you can look at the sidewalls of your tires, if you see abnormal wear on your Fiat Panda 3, it is most likely that the alignment is to blame. In cases like this, go to your garage or tyre expert to correct it.
Fiat Panda 3 pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only trigger for a car that pulls to the right. Indeed, if you have a difference in pressure on your tires, it is obvious that your Fiat Panda 3 is no longer a stable steering. Therefore make sure to verify the pressure of all four tyres. In addition to the risk of an injury if you experience your Fiat Panda 3 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to change them faster.
My Fiat Panda 3 is pulling to the right and I experience vibrations:
Fiat Panda 3 pulling to the right because of the silent blocks
Now let’s look at the case of a Fiat Panda 3 that pulls to the right but also triggers vibrations in the steering wheel. The first regular reason of trajectory error plus vibration is that your silent blocks are dead. Indeed, when they are too damaged, they no longer manage their function of shock absorber and binder between the different elements of your front drivetrain, which can cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Fiat Panda 3 pulls to the right. Verify their condition and change them if needed. In the event that you really want more info on concerns with the silent blocks, please read our specific content page.
My Fiat Panda 3 pulls to the right due to the bearings
Another possibility that your Fiat Panda 3 pulls to the right is that one of your bearings, commonly the front one, is dead, you should, additionally to the trajectory defect, experience a singular vibration or rolling noise. Indeed, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which certainly can cause a trajectory defect. Verify their condition and have them swapped out if needed.
My Fiat Panda 3 pulls to the right due to the shock absorbers
Last but not least, your Fiat Panda 3 that pulls to the right and generates vibrations due to the shock absorbers. Regardless whether it’s the damper cup, your tired springs, or a twisted cylinder, every defect in connection with the shock absorbers can disrupt the usual behaviour of the Fiat Panda 3. You should, however, experience a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers checked and ask your repair shop for a replacement if needed.
If you wish more guides on the Fiat Panda 3, go to our Fiat Panda 3 category.
