Driving a car is a daily activity for many people, our roads are not always safe, and no matter it’s raining, windy or snowing, we quite often have no choice but to take our Fiat 500 X. Not having the capability to act on traffic conditions, we try to have at minimum a safe car! If you are not comfortable, if you have the impression that your Fiat 500 X is pulling to the right, then you are on the good page. We chose to create this content page to help you locate the source of this issue and fairly quickly feel safe behind the wheel of your car. To do this, we will initially take a look at the triggers of a Fiat 500 X that pulls to the right without vibration and to conclude, a car that pulls to the right with vibration.
Fiat 500 X that pulls to the right without vibration
Fiat 500 X pulling to the right because of the alignment
Let’s begin with the circumstance of your Fiat 500 X which pulls to the right without vibration, one of the most typical sources of a non-straight trajectory on a car is the alignment , actually, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is normally carried out when you replace your tires. Nevertheless it is hard or even impossible to know the condition of your alignment, you can look at the sidewalls of your tires, if you see abnormal wear on your Fiat 500 X, it is certain that the alignment is to blame. In this instance, go to your service garage or tyre specialist to correct it.
Fiat 500 X pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only trigger for a car that pulls to the right. In actual fact, if you have a difference in pressure on your tires, it is rational that your Fiat 500 X is no longer a stable steering. Therefore be sure you check the pressure of all four tyres. Additionally to the risk of an accident if you encounter your Fiat 500 X pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to replace them faster.
My Fiat 500 X is pulling to the right and I encounter vibrations:
Fiat 500 X pulling to the right because of the silent blocks
Now let’s look at the case of a Fiat 500 X that pulls to the right but also triggers vibrations in the steering wheel. The first basic trigger of trajectory error plus vibration is that your silent blocks are dead. In actual fact, when they are too worn, they no longer handle their role of shock absorber and binder between the different elements of your front drivetrain, which can cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Fiat 500 X pulls to the right. Examine their condition and replace them if necessary. In the event that you really want more info on trouble with the silent blocks, please go through our specific content page.
My Fiat 500 X pulls to the right due to the bearings
Another possibility that your Fiat 500 X pulls to the right is that one of your bearings, in most cases the front one, is dead, you should, additionally to the trajectory defect, feel a notable vibration or rolling noise. In actual fact, when bearings are damaged, they no longer rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably can cause a trajectory defect. Examine their condition and have them changed if necessary.
My Fiat 500 X pulls to the right due to the shock absorbers
Last but not least, your Fiat 500 X that pulls to the right and creates vibrations due to the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every defect relevant to the shock absorbers can affect the usual behaviour of the Fiat 500 X. You should, even so, encounter a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers examined and ask your repair shop for a replacement if necessary.
If you want more guides on the Fiat 500 X, go to our Fiat 500 X category.
