Driving a vehicle is a daily activity for the majority of us, our roads are not necessarily safe, and regardless whether it’s raining, windy or snowing, we quite often have no choice but to take our Audi S4. Not having the capability to act on traffic conditions, we try to have at least a safe automobile! If you are not confident, if you have the impression that your Audi S4 is pulling to the left, then you are on the good website. We chose to publish this content to help you locate the source of this trouble and as soon as possible feel safe behind the wheel of your car. To make this happen, we will first take a look at the causes of a Audi S4 that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.

pull-leftaudi-s4

Audi S4 that pulls to the left without vibration

Audi S4 pulling to the left because of the alignment

Let’s begin with the circumstance of your Audi S4 which pulls to the left without vibration, one of the most typical roots of a non-straight trajectory on a automobile is the alignment , the truth is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually done when you change your tires. Although it is hard or even impossible to know the state of your alignment, you can take a look at the sidewalls of your tires, if you notice abnormal wear on your Audi S4, it is most likely that the alignment is to blame. In this instance, go to your service garage or tyre professional to correct it.

Audi S4 pulling to the left because of the tyres

Speaking of tires, parallelism isn’t the only motive for a car that pulls to the left. In reality, if you have a difference in pressure on your tires, it is obvious that your Audi S4 is no longer a stable steering. So remember to check the pressure of all four tyres. In addition to the risk of an accident if you encounter your Audi S4 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to change them faster.

My Audi S4 is pulling to the left and I encounter vibrations:

Audi S4 pulling to the left because of the silent blocks

Now let’s look at the case of a Audi S4 that pulls to the left but also causes vibrations in the steering wheel. The first known reason of trajectory error plus vibration is that your silent blocks are dead. In reality, when they are too worn, they not anymore manage their purpose of shock absorber and binder between the different auto parts of your front drivetrain, which will cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Audi S4 pulls to the left. Examine their state and change them if needed. In the event that you really want more information on problems with the silent blocks, please read our specific content.

My Audi S4 pulls to the left because of the bearings

Another possibility that your Audi S4 pulls to the left is that one of your bearings, in most cases the front one, is dead, you should, furthermore to the trajectory problem, experience a notable vibration or rolling noise. In reality, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which consequentially will cause a trajectory problem. Examine their state and have them replaced if necessary.

My Audi S4 pulls to the left because of the shock absorbers

Last but not least, your Audi S4 that pulls to the left and generates vibrations because of the shock absorbers. Whether it’s the damper cup, your tired springs, or a twisted cylinder, every problem relevant to the shock absorbers can disrupt the usual behaviour of the Audi S4. You should, nevertheless, undergo a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked and ask your mechanic for a replacement if necessary.

If you have any further questions about the Audi S4, do not hesitate to consult our Audi S4 category.