We continue our series of content articles on what can get stuck on your car. After seeing why your fuel flap or hood could get stuck, in this article we’ll check out why the key is stuck in your Volkswagen Crafter 2 ignition . Particularly frustrating, having a stuck ignition cylinder will prevent you from starting and consequently from employing your car. We will therefore do everything we can to help you solve this problem as soon as possible. To do this, first, we will describe to you what the ignition of your motor vehicle is used for, then in a second time, why the ignition barrel of your Volkswagen Crafter 2 is stuck? And, to finish, how to unblock the key stuck in your Volkswagen Crafter 2 ignition.

key-stuck-ignition-volkswagen-crafter-2

What’s the goal of my Volkswagen Crafter 2’s ignition lock?

The ignition lock of your Volkswagen Crafter 2 is a security part. Its intent is to protect your car from theft tries. It is installed on the steering column of your car, invented in 1931 by Abram Neiman. Its intent is to prevent your Volkswagen Crafter 2 from starting by blocking the steering and the steering lock if it does not identify your car key. It is closely related to the starter switch which will integrate the key lock and an electric switch. There is a tendency to confuse the starter switch and the neiman, and when we speak about blocked neiman we generally refer to a key that does not turn or does not turn well in the cylinder of the lock of your car.

Why is the key stuck in your Volkswagen Crafter 2 ignition?

Now it’s time to describe to you why the key is stuck in your Volkswagen Crafter 2 ignition cylinder . Now that we’ve described what the ignition is, it’s time to identify why it’s stuck. If it is the steering wheel of your Volkswagen Crafter 2 that is blocked, do not think twice to have a look at our content page on this matter. A neiman is not a wearing part that you replace repeatedly but time has an influence on it and it can occur that you have to replace it due to normal wear and tear. On this website are the different explanations of a ignition that locks on Volkswagen Crafter 2 :

  • Regular wear and tear on the ignition barrel of your Volkswagen Crafter 2 : As we said earlier, over time, the elements of the neiman can become seized up, or become filled with dust or small particles from the outside that will prevent it from functioning properly. In this case, you should experience issue inserting and turning the key before it locks entirely.
  • A component of the ignition of your Volkswagen Crafter 2 that breaks down: In the same logic, an element of the neiman can fail. As we revealed in introduction, when we mention the neiman we often include, the cylinder, the lock and the starter switch, if one of these parts is defective, the neiman will not let the key turn in the cylinder of the lock
  • Someone forced too much on the ignition barrel of your Volkswagen Crafter 2: Finally, last opportunity, and it’s more or less logical, if someone forced too much on the neiman in unlocking the steering wheel of your car before, he may have twisted internal elements and thus damaged the neiman of it.

How do I unlock the key stuck in my Volkswagen Crafter 2 ignition barrel?

We now proceed to the solutions available to you for resolving a key stuck in your Volkswagen Crafter 2 ignition . Depending to the source of your problem the solutions will not be similar, discover them down below:

  • Ignition barrel blocked due to a twisted key: If your key is twisted, it is obvious that your neiman will not unblock. Try gently with a mallet to straighten your key, if you can’t do it, use the duplicate of your key.
  • Ignition cylinder If the neiman of your Volkswagen Crafter 2 is clogged due to impurities : Use a WD40 type degreaser and let it work for a couple of minutes, it should unblock the neiman of your Volkswagen Crafter 2.
  • .

  • If your key is stuck in your ignition due to a defective element: If finally it is due to an internal element that your ignition lock is no longer unblocked you will unfortunately have to replace the whole block (electronic switch, lock cylinder, neiman), we suggest you to go to a specialist who will also have to give you a new key to begin your Volkswagen Crafter 2.

.

If you have any additional questions about the Volkswagen Crafter 2, do not hesitate to consult our Volkswagen Crafter 2 category.