We continue our series of articles on what can get stuck on your motor vehicle. After seeing why your fuel flap or hood could get stuck, in this article we’ll check out why the key is stuck in your Dodge Challenger ignition . Especially irritating, having a stuck ignition cylinder will prevent you from starting and consequently from utilising your motor vehicle. We will consequently do everything we can to help you remedy this problem as quickly as possible. To do this, first, we will describe to you what the ignition of your motor vehicle is used for, then in a second time, why the ignition barrel of your Dodge Challenger is stuck? And, finally, how to unblock the key stuck in your Dodge Challenger ignition.

key-stuck-ignition-dodge-challenger

What’s the purpose of my Dodge Challenger’s ignition lock?

The ignition lock of your Dodge Challenger is a security component. Its aim is to protect your car from theft tries. It is placed on the steering column of your motor vehicle, invented in 1931 by Abram Neiman. Its aim is to prevent your Dodge Challenger from starting by blocking the steering and the steering lock if it does not recognize your motor vehicle key. It is closely connected to the starter switch which will integrate the key lock and an electric switch. There is a tendency to confuse the starter switch and the neiman, and when we talk about blocked neiman we quite often make reference to a key that does not turn or does not turn well in the cylinder of the lock of your motor vehicle.

Why is the key stuck in your Dodge Challenger ignition?

Now it’s time to describe to you why the key is stuck in your Dodge Challenger ignition cylinder . Now that we’ve detailed what the ignition is, it’s time to identify why it’s stuck. If it is the steering wheel of your Dodge Challenger that is blocked, do not think twice to have a look at our article on this subject matter. A neiman is not a wearing component that you change regularly but time has an influence on it and it can occur that you have to change it as a result of normal wear and tear. On this website are the different explanations of a ignition that locks on Dodge Challenger :

  • Normal wear and tear on the ignition barrel of your Dodge Challenger : As we stated over, over time, the components of the neiman can become seized up, or become packed with dust or small particles from the outside that will prevent it from functioning properly. In this case, you should feel issue inserting and turning the key before it locks totally.
  • A component of the ignition of your Dodge Challenger that breaks down: In the same logic, an element of the neiman can fail. As we revealed in introduction, when we speak about the neiman we tend to include, the cylinder, the lock and the starter switch, if one of these parts is faulty, the neiman will not let the key turn in the cylinder of the lock
  • Someone forced too much on the ignition barrel of your Dodge Challenger: Finally, last opportunity, and it’s more or less logical, if someone forced too much on the neiman in unlocking the steering wheel of your motor vehicle before, he may have twisted internal components and thus damaged the neiman of it.

How do I unlock the key stuck in my Dodge Challenger ignition barrel?

We now proceed to the solutions available to you for handling a key stuck in your Dodge Challenger ignition . Depending to the origin of your problem the solutions will not be the same, find them below:

  • Ignition barrel blocked as a result of a twisted key: If your key is twisted, it is logical that your neiman will not unblock. Try softly with a mallet to straighten your key, if you can’t do it, use the copy of your key.
  • Ignition cylinder If the neiman of your Dodge Challenger is clogged as a result of impurities : Use a WD40 type degreaser and let it work for a few moments, it should unblock the neiman of your Dodge Challenger.
  • .

  • If your key is stuck in your ignition as a result of a faulty element: If finally it is as a result of an internal element that your ignition lock is no longer unblocked you will unfortunately have to change the whole block (electronic switch, lock cylinder, neiman), we advise you to go to a professional who will as well have to give you a new key to begin your Dodge Challenger.

.

To discover more tips on the Dodge Challenger, take a look at the Dodge Challenger category.