Keeping an eye on your vehicle is important in the present day, indeed, if you do not do the lowest routine service of it, or if you do not take into account signals of abnormality, you highly risk to see your car becoming unpleasant to use. This is exactly the subject we are going to discuss in this article, one of the indications that most interferes with car owners is the key indicator light on GMC Canyon dash . To try to help you analyze this light, first we will see what this key light on GMC Canyon corresponds to, then in a second what to do if the key light is lit on GMC Canyon? .
What does the key light on GMC Canyon indicate?
So we begin our article with the meaning of a key indicator light on GMC Canyon dash , it may be that in addition to the key you have the logo of a car next to it. Take note that the main objective of this light is to notify you that it’s time to service your GMC Canyon , nevertheless, this light can also have other explanations, even dozens of them. To find the origin of this problem the best remedy will be to run your GMC Canyon through the diagnostic too l, if you don’t know how to do this procedure, you can locate all the required info to accomplish this action in our dedicated article. We will try in the following list to give you the maximum info on the main alert messages it can send you:
- An oil change conducted without resetting the indicator: If you have done your oil change on your own, it is probably that you have not thought of resetting the oil change indicator of your GMC Canyon, here is the procedure to do this small reset of the key light of your car.
- Oil level problem: It is possible that the oil level sensor is revealing that the oil level is too low.
- EGR Valve: Another possibility is that the key light on your GMC Canyon is on because your EGR valve is dirty, frequently the case if you are driving short distances or not pushing the gears of your car.
- Glow plugs: Finally, the last and most basic trigger of an orange wrench light on GMC Canyon is that your glow plugs are getting tired.
What if the orange key light on GMC Canyon is on?
We are now going to proceed to the second part of our article and try to present you the solutions to each of the problems described in the previous part and therefore what to do if I see the wrench light on your GMC Canyon? To do this, we will take turns answering each of the problems you may face:
- Reset the drain indicator light: As we mentioned before, a simple reset of the indicator light on your GMC Canyon will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our article to accomplish this operation.
- Oil level problem: This is a very basic problem and the easiest to correct. You will just have to verify your oil level, we suggest you to take the opportunity to check all your oil levels.
- EGR Valve: In the case of a light that comes on due to the EGR valve, you will need to have the details of this fault code through the diagnostic tool. Once you are sure of the origin of the problem, you can try to clean your car by pushing the gears (hot engine), otherwise disassemble and clean the EGR valve of your GMC Canyon, we done a guide to help you to do it. Otherwise, go to a garage and prepare to pay a few hundred euros.
- Glow plugs: Finally, if your problem originates from your glow plugs, the procedure to change them is quite simple and you won’t need more than 40 euros worth of glow plugs.
There, you now know everything about the wrench light on GMC Canyon , we hope this article has helped you solve your problem.
If you want more guides on the GMC Canyon, go to our GMC Canyon category.
