Do you have the feeling of a power drop without any rational reason, and all this happens in an unknown or usual way? Maybe it’s because your Jeep Grand Cherokee is going to limp mode . The fact is, the security mode can be activated on a motor vehicle for a number of causes and the activation of this mode will set the engine’s behavior, often causing a momentary or irreparable loss of power from your Jeep Grand Cherokee until you deal with the issue. Our editors wanted to compose this guide so that you can handle this concern, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to address these concerns, we will focus on the limp mode of your Jeep Grand Cherokee. And secondly, what are the causes why your Jeep Grand Cherokee goes into security mode?
Jeep Grand Cherokee THAT GOES TO limp mode: WHAT IS IT?
Let’s start our content with the definition of your Jeep Grand Cherokee that goes to limp mode . You probably won’t have any information about the fact that this mode has been turned on and you will just experience the outcomes. Usually the clues of a safety mode on your Jeep Grand Cherokee will be that you will identify an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Jeep Grand Cherokee more than difficult. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the screen to suggest that you go to your auto mechanic to deal with the issue as quickly as possible. In fact, via your vehicle’s ECU and the various sensors that continuously monitor the procedure of your engine unit, your Jeep Grand Cherokee that goes to safety is in fact a kind of electronic flange of your engine unit. On the other hand, you must be serious about this quickly because it probably hides a concern that needs to be dealt with, however, specifically with time, certain components such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more quickly. In some scenarios, simply turning your Jeep Grand Cherokee off and on again will be enough to turn off the security mode, in other cases the original concern must be solved to return to regular actions.
Why is my Jeep Grand Cherokee going into limp mode?
Now we’re going to highlight the causes why your Jeep Grand Cherokee is on limp mode. To begin with you can easily check whether this is the circumstance by using your diagnostic plug and Jeep Grand Cherokeereading the fault codes of your Jeep Grand Cherokee. Please have a look at our specific article which teaches you how to use these tools and interpret the fault codes of your Jeep Grand Cherokee yourself. You should find out a fault code displayed because of an engine unit component. Depending on the finish of your motor vehicle the on-board computer will as well tell you that you are in security mode. We will then discover most of the parts that can make your Jeep Grand Cherokee safe.
- Turbo: A defective turbo will immediately inform your computer and make your motor vehicle safe.
- The EGR valve: If your car is ever used in a really quiet technique or just for short trips at low speed, it will often clog up and trigger the security mode to be activated.
- The Particle Filter: A component famous for the problems it causes, in case your PAP is clogged, you will be subject to a safety shutdown of your Jeep Grand Cherokee just because your engine will not be able to effectively exhaust the exhaust gases.
- The flow meter: Finally, the flow meter is the last of the established motives of an Jeep Grand Cherokee going into security. In fact, if it doesn’t manage the air/fuel mixture effectively, your ECU will know the problem instantly.
In case you have any other worries or questions about your motor vehicle, you can certainly discover the solution in our Jeep Grand Cherokee Guide.
If you want more tutorials on the Jeep Grand Cherokee, go to our Jeep Grand Cherokee category.