Having a issue with your motor vehicle is traditional, because regrettably recent automobiles are more and more difficult and therefore at the mercy of more and more possible breakdowns. In this article we’re going to try to help you to solve an injection problem on your Ford S-max 2 . This is a issue that is particularly irritating because it can ultimately bring your car to non starting or damaged engine. To achieve this, first we will discover how injection functions, then, what are the different concerns that can exist on a Ford S-max 2 injectors , and finally, how to solve them.

injection-problem-ford-s-max-2

What is the intent of the injection of a Ford S-max 2?

So we start our article by promptly explaining how an injection system functions so that you have all the information you need to figure out the failures connected with it. < br>
The injection system of a Ford S-max 2 manages the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Ford S-max 2. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and therefore a better combustion.

What are the different injection problems on Ford S-max 2?

Now in this second component, we are going to discover the different injection problems and their manifestations that you might come across on your Ford S-max 2 .

Injection pump problems Ford S-max 2

To start, we will discover the injection pump problems on your Ford S-max 2, there are not many of them, they are often recurrent but we will highlight them below:

  • Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will trigger a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine of your Ford S-max 2.
  • Leakage from the injection pump of your Ford S-max 2: If you have a major leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good

.
Regarding the outcomes and manifestations of a fuel pump issue on a Ford S-max 2 , you will most certainly feel, a lack of power, your engine grazing, dark smoke emissions…

Injectors problems Ford S-max 2

Now we move on to the injector problems on Ford S-max 2 . Injectors are the end of your injection system, here are the different problems you might encounter:

  • Dirty Ford S-max 2 injectors: This can happen due to poor fuel quality, they will let less fuel through or more if they are completely clogged. So you will possibly have one or more cylinders that are not functioning properly.
  • Leaky Ford S-max 2 injector: It’s often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Ford S-max 2 HS: This is the case when your injectors are completely clogged or when you have an electronic problem, it will not let anything go.

Concerning the signs of illness of injector problems on your Ford S-max 2 it is about the same as for a defective injection pump. You might encounter problems with starting, throttle response, power loss, and smoke emission.

How to resolve an injection issue on a Ford S-max 2?

To conclude our content page on the injection problems on Ford S-max 2 , we will try to give you the solutions that exist to solve these problems.
If after a precise investigation it’s your injection pump that is the main cause of your problems, it will regrettably be very complicated to intervene on the trouble without replacing the component, this change often goes with the replacement of the injectors, and in some cases the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Regarding a issue with an injector there are different solutions based on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Ford S-max 2, do not think twice to seek advice from our article on this subject to get the procedure. If it doesn’t work, you will have to change them.
  • Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to replace it, do not hesitate to seek advice from our article on the injectors that leak on Ford S-max 2, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, generally, the replacement of an injector costs around 500 euros labor included.

To find more tips on the Ford S-max 2, take a look at the Ford S-max 2 category.