Having a issue with your car is basic, because unfortunately recent vehicles are more and more difficult and consequently exposed to more and more possible breakdowns. In this article we’re going to try to help you to resolve an injection problem on your Fiat Panda . This is a issue that is particularly frustrating because it can ultimately bring your car to non starting or damaged engine. To get this done, first we will find out how injection functions, then, what are the different problems that can exist on a Fiat Panda injectors , and finally, how to resolve them.

injection-problem-fiat-panda

What is the intent of the injection of a Fiat Panda?

So we commence our content by promptly detailing how an injection system functions so that you have all the information you need to discover the failure associated with it. < br>
The injection system of a Fiat Panda handles the fuel intake into the engine , it replaces the old carburettors. It has the advantage to be much more precise and to come, under pressure, to launch the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Fiat Panda. The advantage of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and consequently a better combustion.

What are the different injection problems on Fiat Panda?

Now in this second part, we are going to discover the different injection problems and their symptoms that you may confront on your Fiat Panda .

Injection pump problems Fiat Panda

To commence, we will find out the injection pump problems on your Fiat Panda, there are not many of them, they are often frequent but we will outline them below:

  • Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will cause a bad air/fuel mixture and consequently a bad combustion and thus alter the performance of the engine of your Fiat Panda.
  • Leakage from the injection pump of your Fiat Panda: If you have a significant leakage problem, the end result will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good

.
Concerning the outcomes and symptoms of a fuel pump issue on a Fiat Panda , you will obviously feel, a lack of power, your engine grazing, dark smoke emissions…

Injectors problems Fiat Panda

Now we proceed to the injector problems on Fiat Panda . Injectors are the end of your injection system, here are the different problems you may encounter:

  • Dirty Fiat Panda injectors: This can happen as a result of poor fuel quality, they will let less fuel through or more if they are completely clogged. So you will potentially have one or more cylinders that are not working properly.
  • Leaky Fiat Panda injector: It’s often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Fiat Panda HS: This is the circumstance when your injectors are completely clogged or when you have an electronic problem, it will not let anything go.

Regarding the symptoms of injector problems on your Fiat Panda it is about the same as for a faulty injection pump. You may encounter problems with starting, throttle response, power loss, and smoke emission.

How to fix an injection issue on a Fiat Panda?

To finish our article on the injection problems on Fiat Panda , we will try to give you the solutions that exist to resolve these problems.
If after a precise diagnosis it’s your injection pump that is the cause of your problems, it will unfortunately be very complicated to intervene on the issue without replacing the part, this change often goes with the replacement of the injectors, and in some cases the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Concerning a issue with an injector there are different solutions based on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Fiat Panda, do not hesitate to seek advice from our content on this subject to get the procedure. If it doesn’t work, you will have to replace them.
  • Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to replace it, do not think twice to seek advice from our content on the injectors that leak on Fiat Panda, to have all the solutions available to you.
  • Injector HS: Finally, last solution, your injector is damaged or doesn’t work anymore, in general, the replacement of an injector costs around 500 euros labor included.

If you want more guides on the Fiat Panda, go to our Fiat Panda category.