Having a problem with your car is common, because sadly recent vehicles are more and more difficult and therefore subject to more and more possible breakdowns. On this page we’re going to try to help you to resolve an injection problem on your Alfa Romeo Mito . This is a problem that is particularly annoying because it can eventually bring your car to non starting or broken engine. To get this done, first we will discover how injection functions, then, what are the different problems that can exist on a Alfa Romeo Mito injectors , and at last, how to resolve them.

injection-problem-alfa-romeo-mito

What is the intent of the injection of a Alfa Romeo Mito?

So we commence our content by quickly detailing how an injection system functions so that you have all the info you need to understand the failure affiliated with it. < br>
The injection system of a Alfa Romeo Mito controls the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Alfa Romeo Mito. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and therefore a better combustion.

What are the different injection problems on Alfa Romeo Mito?

Now in this second part, we are going to discover the different injection problems and their symptoms that you may confront on your Alfa Romeo Mito .

Injection pump problems Alfa Romeo Mito

To begin, we will discover the injection pump problems on your Alfa Romeo Mito, there are not many of them, they are quite often persistent but we will outline them below:

  • Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system may be too high or too low which will trigger a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine of your Alfa Romeo Mito.
  • Leakage from the injection pump of your Alfa Romeo Mito: If you have a major leakage problem, the consequence will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good

.
Concerning the consequences and symptoms of a fuel pump problem on a Alfa Romeo Mito , you will certainly feel, a lack of power, your engine grazing, dark smoke emissions…

Injectors problems Alfa Romeo Mito

Now we proceed to the injector problems on Alfa Romeo Mito . Injectors are the end of your injection system, here are the different problems you may encounter:

  • Dirty Alfa Romeo Mito injectors: This can happen as a result of poor fuel quality, they will let less fuel through or more if they are totally clogged. So you will probably have one or more cylinders that are not working effectively.
  • Leaky Alfa Romeo Mito injector: It’s quite often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Alfa Romeo Mito HS: This is the case when your injectors are totally clogged or when you have an electronic problem, it will not let anything go.

Concerning the symptoms of injector problems on your Alfa Romeo Mito it is about the same as for a faulty injection pump. You may encounter problems with starting, throttle response, power loss, and smoke emission.

How to get rid of an injection problem on a Alfa Romeo Mito?

To finish our article content on the injection problems on Alfa Romeo Mito , we will try to give you the solutions that exist to resolve these problems.
If after a precise diagnosis it’s your injection pump that is the reason of your problems, it will sadly be very difficult to intervene on the trouble without replacing the part, this change quite often goes with the replacement of the injectors, and sometimes the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Concerning a problem with an injector there are various solutions based on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Alfa Romeo Mito, do not hesitate to seek advice from our content on this subject to get the process. If it doesn’t work, you will have to replace them.
  • Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to have the ability to replace it, do not hesitate to seek advice from our content on the injectors that leak on Alfa Romeo Mito, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, generally speaking, the replacement of an injector costs around 500 euros labor included.

If you wish more tutorials on the Alfa Romeo Mito, go to our Alfa Romeo Mito category.