Modern vehicles have more and more functionnalities and although they bring us a lot of comfort, a lot of them are not all the time convenient to use. Regardless you have rented a car, been lent one, or just bought a Peugeot Expert Tepee, depending on its functionnalities, it can be hard to understand how to start a Peugeot Expert Tepee? Even if this fundamental act of running a car may seem self evident to most of you, depending on the options and the year of production of your car, it will be more or less simple to do so. Today we will explain the several techniques to start a Peugeot Expert Tepee with the key, then, in a second step, how to switch on a Peugeot Expert Tepee with a card, and to conclude, without using the key.
How to start a Peugeot Expert Tepee with key?
So we commence our article which is meant to show you how to start a Peugeot Expert Tepee, which is supplied with a classic key start. Find under the different guidelines to be carried out to turn on the engine of your Peugeot Expert Tepee:
- Determine the location of the neiman (hole in which the key is inserted), it is generally on the right side of your steering wheel, on the dash. If your steering wheel is blocked, do not think twice to read our article on the steering wheel blocked on Peugeot Expert Tepee that is blocked to find out how to unblock it.
- Put the key into this one.
- Verify that you are in neutral for a manual car and in the “N” or “P” position for an automatic transmission.
- Turn the ignition on by turning it clockwise a quarter turn till you feel you’ve passed the first notch.
- Check on your dashboard that the orange lights disappear, if you don’t know what they suggest don’t think twice to read our article on orange lights on Peugeot Expert Tepee to discover the reason for this.
- You just have to go one more notch clockwise and hold it in the stop until your Peugeot Expert Tepee starts (do not let your starter run more than 10 seconds otherwise you risk damaging it, if the car does not start, let it recover a few tens of seconds before a new test)
- That’s it. You handled to start your Peugeot Expert Tepee,
.
How to start a Peugeot Expert Tepee with the key card?
After finding out about how to turn on the engine of a Peugeot Expert Tepee with key or will describe you how to do it for a Peugeot Expert Tepee equipped with a key card and not a key. The technique is still roughly similar, so don’t think twice to go back to the previous section to get details on each of the steps to do. Learn listed below the guidelines to stick to to start your Peugeot Expert Tepee with a card:
- Dependent on the year and the series, you may or may not need to put in the card in a dedicated slot, examine on your dashboard if your Peugeot Expert Tepee is equipped with this slot or not.
- If it has one, insert the card in this hole, otherwise you can keep the card on you or anywhere in the cabin.
- Uncover the “start” button, which is commonly placed at steering wheel height close to the classic neiman location, otherwise it is commonly positioned on the centre console.
- Verify that you’re in neutral or neutral on an automatic transmission.
- Press the “start” button once to turn on the ignition of your Peugeot Expert Tepee
- Press a second time after a few seconds or extinction of the orange lights on your dashboard to start your Peugeot Expert Tepee
.
.
How do I start a Peugeot Expert Tepee without a key?
And to conclude, we will see, how to start a Peugeot Expert Tepee without a key? Let’s imagine that you have lost your keys and your car is open, this might seem obvious. Even so, you should know that if your Peugeot Expert Tepee is more recent than the mid 90’s it will be complicated to start it without a key because of all the security gadgets present on it. Of course, this should only be done on YOUR car. Here is the technique to follow:
- Remove the cover that protects your steering wheel and find among the 3 electric switches the one that concerns your engine/battery/starter (to help you, please bring your user manual).
- Strip, connect them mutually and isolate the battery and ignition wires (be careful not to electrocute yourself during the procedure). You now have electricity as if you had the contact
- Finally, strip the starter wire and connect it promptly with the battery wire (do not make lengthened contact and only 1 or 2 seconds should be enough to start your Peugeot Expert Tepee).
There, you’ve learned all the options to start a Peugeot Expert Tepee.
Whenever you have any further questions about the Peugeot Expert Tepee, do not hesitate to consult our Peugeot Expert Tepee category.
