If you’re a bit of a do-it-yourselfer, you’re probably willing to take care of almost all of the service to be achieved on your Peugeot Boxer, but some are more complex than others and necessitate the removal of body parts or elements to access the component you want to work on. We want to help you in this process. That’s why today we are going to find out how to remove the bumper from a Peugeot Boxer. This action is not very complex and you should have the ability to do it with few equipment. To accomplish this, first we will discover how to remove the front bumper of your Peugeot Boxer, then how to remove the rear bumper of this one.
How to remove the front bumper from a Peugeot Boxer
So let’s begin our article content with the front bumper of your Peugeot Boxer. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to adhere to in order to disassemble the bumper of your Peugeot Boxer in good conditions:
- If you want to be more comfy, we suggest you to lift your Peugeot Boxer and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Peugeot Boxer. According to your motor vehicle features and the year of your model, you will also be able to find staples, to do this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Peugeot Boxer on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go beneath your Peugeot Boxer to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot Boxer, to reassemble it adhere to the steps in the opposite direction.
How to remove the rear bumper from a Peugeot Boxer
And to finish, even if the operation is quite equivalent, we will take a look at the case of removing the rear bumper from your Peugeot Boxer. For each stage to avoid repeating ourselves we will simply give you the broad highlights, read the part 1 if you have any concerns or questions for more info.
- Start by performing the same first stage, that is, lift your Peugeot Boxer and take out your rear wheels in order to have an ideal working space to remove the bumper of your Peugeot Boxer serenely
- Remove the rear wheel arches of your Peugeot Boxer to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it less complicated to remove the bumper from your Peugeot Boxer.
- Take off the lower bindings below your Peugeot Boxer.
- Simultaneously, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Peugeot Boxer, adhere to the same technique as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Peugeot Boxer whether it is the front one or the rear one the ways are practically the same and it is enough to be meticulous to make everything go well.
To discover more tips on the Peugeot Boxer, take a look at the Peugeot Boxer category.
