If you’re a bit of a handy person, you’re most certainly eager to handle the majority of the service to be completed on your Peugeot 806, but some are more complex than others and require the removal of body parts or elements to access the component you want to work on. We want to help you in this operation. That’s why on this web page we are going to discover how to remove the bumper from a Peugeot 806. This action is not very complex and you should have the ability to do it with few tools. For that, first we will discover how to remove the front bumper of your Peugeot 806, then how to remove the rear bumper of this one.
How to remove the front bumper from a Peugeot 806
So let’s begin our document with the front bumper of your Peugeot 806. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to to be able to disassemble the bumper of your Peugeot 806 in good conditions:
- If you want to be more relaxed, we recommend you to put your Peugeot 806 on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your car: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Peugeot 806. Dependant on your vehicle features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that locks the front bumper of your Peugeot 806 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go underneath your Peugeot 806 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Be sure you unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of working with a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot 806, to put it back in place adhere to the steps in the opposite direction.
How to remove the rear bumper from a Peugeot 806
And to finish, whether or not the operation is quite equivalent, we will look at the case of removing the rear bumper from your Peugeot 806. For each stage to avoid repeating ourselves we will simply give you the broad highlights, read the part 1 if you have any doubts or questions for more info.
- Start with executing the same first stage, that is, lift your Peugeot 806 and take off your rear wheels to be able to have an optimal working area to remove the bumper of your Peugeot 806 serenely
- Remove the rear wheel arches of your Peugeot 806 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it more convenient to remove the bumper from your Peugeot 806.
- Take out the lower bindings underneath your Peugeot 806.
- Simultaneously, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Peugeot 806, adhere to the same method as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Peugeot 806 whether it is the front one or the rear one the solutions are more or less the same and it is enough to be meticulous to make everything go well.
If you need more guides on the Peugeot 806, go to our Peugeot 806 category.
