If you’re a bit of a handy person, you’re probably willing to take care of the majority of the work to be completed on your Lincoln MKZ, but some are more complicated than others and need the removal of body parts or elements to access the component you want to work on. We really want to help you in this operation. That’s why in this article we are going to discover how to remove the bumper from a Lincoln MKZ. This action is not very complicated and you should be able to do it with few equipment. To do so , first we will see how to remove the front bumper of your Lincoln MKZ, then how to remove the rear bumper of this one.
How to remove the front bumper from a Lincoln MKZ
So let’s start our article with the front bumper of your Lincoln MKZ. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to follow to be able to disassemble the bumper of your Lincoln MKZ in good conditions:
- If you want to be more comfy, we advise you to lift your Lincoln MKZ and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your car: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also named fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Lincoln MKZ. Dependant on your automobile features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your Lincoln MKZ on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go below your Lincoln MKZ to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of working with a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Lincoln MKZ, to reassemble it follow the steps in the opposite way.
How to remove the rear bumper from a Lincoln MKZ
And now, regardless if the procedure is quite equivalent, we will look at the case of removing the rear bumper from your Lincoln MKZ. For each step to avoid repeating ourselves we will exclusively give you the broad outlines, refer to part 1 if you have any concerns or questions for more information.
- Start by performing the same first step, that is, lift your Lincoln MKZ and remove your rear wheels to be able to have an ideal working area to remove the bumper of your Lincoln MKZ without trouble
- Remove the rear wheel arches of your Lincoln MKZ to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it less difficult to remove the bumper from your Lincoln MKZ.
- Take out the lower bindings below your Lincoln MKZ.
- At the same time, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Lincoln MKZ, follow the same operation as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Lincoln MKZ whether it is the front one or the rear one the approaches are practically the same and it is enough to be meticulous to make everything go well.
Whenever you have any additional questions about the Lincoln MKZ, do not hesitate to consult our Lincoln MKZ category.
