If you’re a bit of a handy person, you’re probably keen to look after the majority of the work to be done on your Land Rover Discovery Sport, but some are more challenging than others and require the removal of body parts or elements to access the component you want to focus on. We want to help you in this operation. That’s why in this article we are going to find out how to remove the bumper from a Land Rover Discovery Sport. This operation is not very challenging and you should have the ability to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your Land Rover Discovery Sport, then how to remove the rear bumper of this one.

remove-bumper-land-rover-discovery-sport

How to remove the front bumper from a Land Rover Discovery Sport

So let’s begin our document with the front bumper of your Land Rover Discovery Sport. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow in order to disassemble the bumper of your Land Rover Discovery Sport in good conditions:

  • If you want to be more relaxed, we advise you to put your Land Rover Discovery Sport on stands and to remove the front wheels to have a best access to the whole front bumper.
  • Open the bonnet of your motor vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
  • Take away the wheel arches: They’re also named fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Land Rover Discovery Sport. Dependant on your motor vehicle features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is from behind your mudguard and that fastens the front bumper of your Land Rover Discovery Sport on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go under your Land Rover Discovery Sport to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
  • Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Land Rover Discovery Sport, to reassemble it follow the steps in the opposite way.

How to remove the rear bumper from a Land Rover Discovery Sport

And now, whether or not the procedure is quite identical, we will check out the case of removing the rear bumper from your Land Rover Discovery Sport. For each step to avoid repeating ourselves we will exclusively give you the broad highlights, read the part 1 if you have any concerns or questions for more info.

  • Start by undertaking the same first step, that is, lift your Land Rover Discovery Sport and remove your rear wheels in order to have an optimal working area to remove the bumper of your Land Rover Discovery Sport serenely
  • Remove the rear wheel arches of your Land Rover Discovery Sport to access the side bumper side brackets
  • Open your trunk
  • Take away the side brackets in your wheel arches to make it easier to remove the bumper from your Land Rover Discovery Sport.
  • Remove the lower bindings underneath your Land Rover Discovery Sport.
  • While doing so, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Land Rover Discovery Sport, follow the same operation as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Land Rover Discovery Sport whether it is the front one or the rear one the solutions are essentially the same and it is enough to be meticulous to make everything go well.

If you wish more guides on the Land Rover Discovery Sport, go to our Land Rover Discovery Sport category.