If you’re a bit of a do-it-yourselfer, you’re most certainly keen to look after the vast majority of the work to be carried out on your Infiniti QX70, but some are more complex than others and need the removal of body parts or parts to access the part you want to focus on. We really want to help you in this operation. That’s why on this web page we are going to discover how to remove the bumper from a Infiniti QX70. This task is not very complex and you should have the ability to do it with few equipment. For that, first we will see how to remove the front bumper of your Infiniti QX70, then how to remove the rear bumper of this one.
How to remove the front bumper from a Infiniti QX70
So let’s begin our content with the front bumper of your Infiniti QX70. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to in order to disassemble the bumper of your Infiniti QX70 in good conditions:
- If you want to be more comfy, we recommend you to lift your Infiniti QX70 and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also described as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Infiniti QX70. Dependant on your motor vehicle features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that fastens the front bumper of your Infiniti QX70 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go below your Infiniti QX70 to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Infiniti QX70, to put it back in place adhere to the steps in the opposite way.
How to remove the rear bumper from a Infiniti QX70
And to finish, whether or not the operation is quite similar, we will look at the case of removing the rear bumper from your Infiniti QX70. For each step to avoid repeating ourselves we will just give you the broad outlines, read the part 1 if you have any concerns or questions for more details.
- Start by executing the same first step, that is, lift your Infiniti QX70 and remove your rear wheels in order to have an optimal working area to remove the bumper of your Infiniti QX70 without trouble
- Remove the rear wheel arches of your Infiniti QX70 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it less difficult to remove the bumper from your Infiniti QX70.
- Remove the lower bindings underneath your Infiniti QX70.
- Simultaneously, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Infiniti QX70, adhere to the same technique as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Infiniti QX70 whether it is the front one or the rear one the methods are practically the same and it is enough to be meticulous to make everything go well.
To get more tips on the Infiniti QX70, take a look at the Infiniti QX70 category.
