If you’re a bit of a handy person, you’re probably eager to look after almost all of the work to be completed on your Hyundai Kona, but some are more difficult than others and require the removal of body parts or elements to access the part you want to operate on. We would like to help you in this process. That’s why today we are going to discover how to remove the bumper from a Hyundai Kona. This action is not very difficult and you should be able to do it with few equipment. To do so , first we will see how to remove the front bumper of your Hyundai Kona, then how to remove the rear bumper of this one.
How to remove the front bumper from a Hyundai Kona
So let’s start our article content with the front bumper of your Hyundai Kona. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to in order to disassemble the bumper of your Hyundai Kona in good conditions:
- If you want to be more comfy, we encourage you to put your Hyundai Kona on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your automobile: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also called fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Hyundai Kona. According to your automobile features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that fastens the front bumper of your Hyundai Kona on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Hyundai Kona to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Hyundai Kona, to put it back in place stick to the steps in the opposite way.
How to remove the rear bumper from a Hyundai Kona
And to finish, regardless if the procedure is quite identical, we will look at the case of removing the rear bumper from your Hyundai Kona. For each step to avoid repeating ourselves we will only give you the broad highlights, read the part 1 if you have any concerns or questions for more information.
- Start by undertaking the same first step, that is, lift your Hyundai Kona and take out your rear wheels in order to have an ideal working space to remove the bumper of your Hyundai Kona without trouble
- Remove the rear wheel arches of your Hyundai Kona to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it more convenient to remove the bumper from your Hyundai Kona.
- Take out the lower bindings underneath your Hyundai Kona.
- While doing so, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Hyundai Kona, stick to the same technique as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Hyundai Kona whether it is the front one or the rear one the solutions are almost the same and it is enough to be meticulous to make everything go well.
To discover more tips on the Hyundai Kona, take a look at the Hyundai Kona category.
