If you’re a bit of a handy person, you’re probably eager to handle most of the service to be achieved on your Ford S-max 2, but some are more complex than others and require the removal of body parts or elements to access the part you want to work on. We would really like to help you in this process. That’s why in this article we are going to view how to remove the bumper from a Ford S-max 2. This operation is not very complex and you should be able to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your Ford S-max 2, then how to remove the rear bumper of this one.

remove-bumper-ford-s-max-2

How to remove the front bumper from a Ford S-max 2

So let’s begin our article with the front bumper of your Ford S-max 2. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to in order to disassemble the bumper of your Ford S-max 2 in good conditions:

  • If you want to be more comfy, we recommend you to lift your Ford S-max 2 and to remove the front wheels to have a perfect access to the whole front bumper.
  • Open the bonnet of your vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take out the wheel arches: They’re also referred to as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Ford S-max 2. Dependant on your automobile features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is in back of your mudguard and that seals the front bumper of your Ford S-max 2 on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go under your Ford S-max 2 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
  • Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford S-max 2, to reassemble it stick to the steps in the opposite direction.

How to remove the rear bumper from a Ford S-max 2

And to conclude, regardless if the procedure is quite identical, we will check out the case of removing the rear bumper from your Ford S-max 2. For each stage to avoid repeating ourselves we will exclusively give you the broad highlights, refer to part 1 if you have any uncertainties or questions for more information.

  • Start by executing the same first stage, that is, lift your Ford S-max 2 and take out your rear wheels in order to have an optimal working area to remove the bumper of your Ford S-max 2 serenely
  • Remove the rear wheel arches of your Ford S-max 2 to access the side bumper side brackets
  • Open your trunk
  • Take out the side brackets in your wheel arches to make it easier to remove the bumper from your Ford S-max 2.
  • Take away the lower bindings below your Ford S-max 2.
  • At the same time, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Ford S-max 2, stick to the same technique as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Ford S-max 2 whether it is the front one or the rear one the techniques are more or less the same and it is enough to be meticulous to make everything go well.

Whenever you have any additional questions about the Ford S-max 2, do not hesitate to consult our Ford S-max 2 category.