If you’re a bit of a handy person, you’re most likely eager to look after the vast majority of the work to be achieved on your Ford F 250, but some are more challenging than others and require the removal of body parts or parts to access the part you want to focus on. We would really like to help you in this operation. That’s why on this web page we are going to view how to remove the bumper from a Ford F 250. This task is not very challenging and you should have the ability to do it with few tools. For that, first we will discover how to remove the front bumper of your Ford F 250, then how to remove the rear bumper of this one.
How to remove the front bumper from a Ford F 250
So let’s start our article with the front bumper of your Ford F 250. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow in order to disassemble the bumper of your Ford F 250 in good conditions:
- If you want to be more relaxed, we advise you to lift your Ford F 250 and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your car: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also called fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Ford F 250. Depending on your vehicle features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that seals the front bumper of your Ford F 250 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Ford F 250 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of working with a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford F 250, to put it back in place follow the steps in the opposite direction.
How to remove the rear bumper from a Ford F 250
And now, regardless if the procedure is quite equivalent, we will check out the case of removing the rear bumper from your Ford F 250. For each stage to avoid repeating ourselves we will simply give you the broad outlines, read the part 1 if you have any doubts or questions for more details.
- Start with carrying out the same first stage, that is, lift your Ford F 250 and take off your rear wheels in order to have an optimal working space to remove the bumper of your Ford F 250 serenely
- Remove the rear wheel arches of your Ford F 250 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it easier to remove the bumper from your Ford F 250.
- Remove the lower bindings below your Ford F 250.
- Simultaneously, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Ford F 250, follow the same operation as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Ford F 250 whether it is the front one or the rear one the techniques are pretty much the same and it is enough to be meticulous to make everything go well.
If perhaps you have any additional questions about the Ford F 250, do not hesitate to consult our Ford F 250 category.
