If you’re a bit of a do-it-yourselfer, you’re probably keen to manage the vast majority of the work to be done on your Bmw Z4, but some are more challenging than others and require the removal of body parts or elements to access the component you want to operate on. We want to help you in this operation. That’s why on this web page we are going to discover how to remove the bumper from a Bmw Z4. This action is not very challenging and you should be able to do it with few equipment. To do so , first we will discover how to remove the front bumper of your Bmw Z4, then how to remove the rear bumper of this one.
How to remove the front bumper from a Bmw Z4
So let’s begin our article content with the front bumper of your Bmw Z4. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to to be able to disassemble the bumper of your Bmw Z4 in good conditions:
- If you want to be more relaxed, we recommend you to lift your Bmw Z4 and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your vehicle: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also called fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Bmw Z4. Dependant on your automobile features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that fastens the front bumper of your Bmw Z4 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Bmw Z4 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Be sure you disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Bmw Z4, to put it back in place adhere to the steps in the opposite direction.
How to remove the rear bumper from a Bmw Z4
And to finish, regardless if the process is quite equivalent, we will take a look at the case of removing the rear bumper from your Bmw Z4. For each stage to avoid repeating ourselves we will exclusively give you the broad outlines, read the part 1 if you have any concerns or questions for more information.
- Start by carrying out the same first stage, that is, lift your Bmw Z4 and take out your rear wheels to be able to have an ideal working area to remove the bumper of your Bmw Z4 without trouble
- Remove the rear wheel arches of your Bmw Z4 to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it easier to remove the bumper from your Bmw Z4.
- Take off the lower bindings underneath your Bmw Z4.
- At the same time, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Bmw Z4, adhere to the same method as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Bmw Z4 whether it is the front one or the rear one the techniques are practically the same and it is enough to be careful to make everything go well.
If you wish more tutorials on the Bmw Z4, go to our Bmw Z4 category.
