If you’re a bit of a do-it-yourselfer, you’re likely keen to manage almost all of the maintenance to be completed on your Bmw Serie 5, but some are more challenging than others and necessitate the removal of body parts or parts to access the part you want to operate on. We would really like to help you in this process. That’s why in this article we are going to discover how to remove the bumper from a Bmw Serie 5. This task is not very challenging and you should have the ability to do it with few equipment. For that, first we will see how to remove the front bumper of your Bmw Serie 5, then how to remove the rear bumper of this one.
How to remove the front bumper from a Bmw Serie 5
So let’s commence our document with the front bumper of your Bmw Serie 5. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to follow to be able to disassemble the bumper of your Bmw Serie 5 in good conditions:
- If you want to be more relaxed, we encourage you to put your Bmw Serie 5 on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your automobile: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also identified as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Bmw Serie 5. Dependant on your automobile features and the year of your model, you will also be able to find staples, to accomplish this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that fastens the front bumper of your Bmw Serie 5 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Bmw Serie 5 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Bmw Serie 5, to reassemble it follow the steps in the opposite direction.
How to remove the rear bumper from a Bmw Serie 5
And now, even if the procedure is quite similar, we will check out the case of removing the rear bumper from your Bmw Serie 5. For each step to avoid repeating ourselves we will only give you the broad highlights, read the part 1 if you have any doubts or questions for more info.
- Start by performing the same first step, that is, lift your Bmw Serie 5 and take out your rear wheels to be able to have an optimal working space to remove the bumper of your Bmw Serie 5 serenely
- Remove the rear wheel arches of your Bmw Serie 5 to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it much easier to remove the bumper from your Bmw Serie 5.
- Take out the lower bindings below your Bmw Serie 5.
- At the same time, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Bmw Serie 5, follow the same procedure as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Bmw Serie 5 whether it is the front one or the rear one the methods are more or less the same and it is enough to be careful to make everything go well.
To find more tips on the Bmw Serie 5, take a look at the Bmw Serie 5 category.
