Wanting to resolve the small problems to be made to your car is becoming a lot more basic. In reality, the annual budget allocated to a car is important, so wanting to fix it on your own appears to be a smart options. It doesn’t matter if it’s to access your fuel pump, change your seat, wash a stain, or exceptionally transport bulky things, some of you are wanting to know how to remove the back seat on Chevrolet Spark. We will try in this post to tell you the different solutions dependant on the year and series of your Chevrolet Spark.
How to remove the back seat on Chevrolet Spark with bolt system
Let’s start with the first scenario. If you are trying to find a method to remove the rear seat of your Chevrolet Spark which is held just by 4 bolts, the solution is most certainly the simplest. In reality, to achieve this, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are based under the seat at the level of the passenger footwell. This will enable you to completely remove it from its fasteners and take it out.
How to remove the back seat Chevrolet Spark with clip system
Solution now a little more difficult because we tend to be cautious of ties that are fixed in force, always afraid to pull too strongly and destroy one. How do I remove the back seat of my Chevrolet Spark that has a clip system? In general these clips will be based under the seat, you will see them when you lift the seat of the bench. These clips are often composed of a plastic part and a metal iron that clips into it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this process does not work, in general pulling will be enough to release them.
How to remove the rear seat Chevrolet Spark with folding system with bolts only at the front
Finally, the last solution to take off the rear seat of your Chevrolet Spark, some years have a folding seat that is not fixed on the rear part, in this case, it is the quickest approach you can have to do. You will just need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Chevrolet Spark.
That’s it, now you should have all the information you need to remove the rear seat of your motor vehicle without problem. If you are looking to dismantle other parts like the bumper of your Chevrolet Spark, we have also write some tutorials to help you in these tasks.
Whenever you have any further questions about the Chevrolet Spark, do not hesitate to consult our Chevrolet Spark category.
