We all have problems with our car sooner or later, whether it’s because you run out of gas, have a fuse issue, or your car won’t start, all these breakdowns tend to bother us and we are often powerless to correct them. That’s why we tries its best to accompany you in front of these problems, and on this page we will try to describe you how to lock your Lexus ES with a dead battery? Indeed, if you have no more electric power, you will not have the ability to use the central locking of your car anymore. We will first describe how to roll up a window of a Lexus ES with a dead battery, and secondly, how to lock the doors of your Lexus ES without battery.

lock-dead-battery-lexus-es

How to roll up a window from an Lexus ES with a dead battery?

So we will start our article content with the procedure to allow you to close your Lexus ES with no power and more exactly the window of this one. Regardless your battery is empty, or you have taken off the battery, you will not have access to the electric controls of your Lexus ES, and therefore no longer have the chance to close the electric windows of your Lexus ES. Unfortunately you don’t have many alternatives to allow you to close them, indeed, closing the electric window of a Lexus ES without battery is unachievable , without energy you don’t have the possibility to run the systems of your window lifter, and even if you remove the trim of your door and try to reassemble the window manually you risk to destroy the motor of the window lifter of your Lexus ES. If, on the other hand, the window of your Lexus ES is stuck whilst you have battery power, make sure you refer to this instruction to find a remedy to your issue. Here are the only two solutions that we can recommend, even though they are quite logical:

  • Get a new battery for your Lexus ES and replace it , which will re-power all the electrical parts of the Lexus ES and thus your window lifter systems. If you are planning to disconnect the battery from your Lexus ES, do not think twice to consult our article to carry out this action.
  • Find a automobile that has battery power and connect your two batteries with jump start wire to recharge the battery and allow you to close the windows of your Lexus ES

.

How to close the doors on a Lexus ES with a dead battery?

And now, we will certainly advance to the section that interests you the more, how to close Lexus ES doors with no power, but this time we will concentrate on the doors of this one. Indeed, your car may be out of battery in front of your house, you managed to open the doors and try to start it, but while waiting to find an answer you want to make sure that no one will have the ability to get inside. Unfortunately, it’s pretty much the same issue as with the windows of your Lexus ES. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press by hand to close your Lexus ES without power, but this is less and less the case. So we will give you as before the only two alternatives to allow you to close your car without energy:

  • Get a new battery and fit it to close the doors of your Lexus ES, or find one in good condition. Nevertheless, you will need access to the bonnet to do so
  • Connect your Lexus ES to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any doubts about your battery’s ability to keep the charge. Make sure you close the doors of your car while it is still linked to the other vehicle. Once you have achieved this, you can disconnect your battery and close your bonnet

.

If you need more tutorials on the Lexus ES, go to our Lexus ES category.