We all have concerns with our motor vehicle at some point, regardless it’s because you run out of gas, have a fuse problem, or your car doesn’t want to start, all these malfunctions tend to bother us and we are ordinarily incapable to correct them. That’s why we tries its best to help you in front of these concerns, and in this article we will try to describe you how to close your Ford Explorer with a dead battery? In reality, if you have no more electricity, you will not have the capacity to use the central locking of your car anymore. We will first explain how to roll up a window of a Ford Explorer with a dead battery, and secondly, how to close the doors of your Ford Explorer without battery.
How to roll up a window from an Ford Explorer with a dead battery?
So we will start our document with the methodology to allow you to close your Ford Explorer with no power and more precisely the window of this one. Regardless whether your battery is out of power, or you have removed the battery, you will not have access to the electric controls of your Ford Explorer, and therefore no longer have the possibility to close the electric windows of your Ford Explorer. Unfortunately you don’t have many alternatives to allow you to close them, in fact, closing the electric window of a Ford Explorer without battery is unachievable , with no power you don’t have the possibility to run the mechanisms of your window lifter, and even if you remove the trim of your door and try to reassemble the window manually you risk to break the motor of the window lifter of your Ford Explorer. In the event that, on the other hand, the window of your Ford Explorer is stuck whilst you have battery power, please refer to this instruction to find a solution to your problem. Here are the only two answers that we can recommend, although they are quite logical:
- Get a new battery for your Ford Explorer and swap it , which will re-power all the electrical parts of the Ford Explorer and thus your window lifter mechanisms. If you are planning to disconnect the battery from your Ford Explorer, do not think twice to read our guide to perform this action.
- Find a automobile that has battery power and connect your two batteries with jump start wire to recharge the battery and allow you to close the windows of your Ford Explorer
.
How to close the doors on a Ford Explorer with a dead battery?
And now, we will surely advance to the section that interests you the more, how to close Ford Explorer doors with no power, nevertheless this time we will focus on the doors of this one. In reality, your car may be out of battery in front of your house, you managed to open the doors and try to start it, but while waiting to find a remedy you want to make sure that nobody will have the opportunity to get inside. Unfortunately, it’s pretty much the same problem as with the windows of your Ford Explorer. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press by hand to close your Ford Explorer without power, but this is less and less the case. So we will give you as before the only two possibilities to allow you to close your car without energy:
- Get a new battery and install it to close the doors of your Ford Explorer, or find one in good condition. Nevertheless, you will need access to the bonnet to do so
- Connect your Ford Explorer to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any worries about your battery’s ability to keep the charge. Make sure to close the doors of your car while it is still connected to the other automobile. Once you have achieved this, you can disconnect your battery and close your bonnet
.
Whenever you have any additional questions about the Ford Explorer, do not hesitate to consult our Ford Explorer category.
