Recent cars all come with an impressive number of features, but, because of your budget or the year of your Volkswagen Transporter 5, you may not be fortunate enough to have them all. On this page we’re going to help you correct this problem by telling you how to install parking sensor on my Volkswagen Transporter 5? Indeed, this option is extremely useful, especially if you live in the city and have to park your car regularly in narrow parking areas. To help you out, we’ll first examine how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Volkswagen Transporter 5, and at last, how much does a parking sensor cost?
How does parking sensors operate on an Volkswagen Transporter 5?
So we begin with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option will allow you to know the distance between the back of your Volkswagen Transporter 5 and an obstacle when you maneuver. It is consequently mainly logical for persons who have to maneuver on a regular basis, whose field of vision is bad, or whose vehicle size is big.
Often times installed as standard, the reverse sensors of a Volkswagen Transporter 5 integrate a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will rise in intensity with the proximity of the obstacle and in some cases a visual marker in complement. The reversing radars of a Volkswagen Transporter 5 will help you for parking, but also for security and staying away from pedestrians.
How to install parking sensors on a Volkswagen Transporter 5?
We now proceed to the section that you are quite likely most excited about, fitting reverse parking sensors on a Volkswagen Transporter 5. This part is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Volkswagen Transporter 5.
How to change a faulty backup sensors on a Volkswagen Transporter 5
First we’ll see how to change a faulty parking sensor on an Volkswagen Transporter 5. In cases where your Volkswagen Transporter 5 has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to let the system to function correctly. Luckily for you this procedure is extremely simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacement unit radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take out the broken parking sensor from your Volkswagen Transporter 5, this stage is very intuitive, it is simply clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating correctly.
- You will simply need to follow the installation guidelines, but we summarize here the main simple steps.
- Take out the bumper if you don’t have access to the inside of it.
- Think about the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Position your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Follow the installation instructions which is accessible with some electrical bases.
- Locate the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Test it all out.
How to install an aftermarket parking sensor kit on an Volkswagen Transporter 5
Now we advance to the part you’re most certainly most excited about, how to install a reverse sensor set up on a Volkswagen Transporter 5 that doesn’t have one? As we mentioned earlier on, you’re lucky because many of OEMs now provide auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will definitely have to remove the bumper of your Volkswagen Transporter 5 for the installation, do not hesitate to browse our article on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a specialist, the task should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Volkswagen Transporter 5
And at last, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Transporter 5. There are two kind, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Volkswagen Transporter 5?
Price of changing a faulty reversing parking sensor for an Volkswagen Transporter 5
The replacement of a broken reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is required to count about one hundred euros for the installation of the kit by a specialist.
Price of an ultrasonic parking sensors with drilling for Volkswagen Transporter 5
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high class kit.
Price of a parking sensors kit without drilling for a Volkswagen Transporter 5
.
To finish, for the price of a reversing radar without drilling for your Volkswagen Transporter 5, what ever version you choose, you will have to pay between 30 and 60 euros.
To discover more tips on the Volkswagen Transporter 5, take a look at the Volkswagen Transporter 5 category.
