Modern cars all come with an incredible amount of technology, however, due to your budget or the year of your Volkswagen Polo 5, you may not be sufficiently lucky to have them all. Today we’re going to help you solve this concern by telling you how to install parking sensor on my Volkswagen Polo 5? In reality, this feature is very useful, especially if you live in the city and have to park often in narrow parking spaces. To help you out, we’ll first view how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Volkswagen Polo 5, and to finish, how much does a parking sensor cost?


How does parking sensors operate on an Volkswagen Polo 5?

So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature allows you to know the distance between the back of your Volkswagen Polo 5 and an obstacle when you maneuver. It is as a consequence particularly legitimate for owners who have to maneuver frequently, whose field of vision is bad, or whose vehicle size is huge.
Frequently installed as standard, the reverse sensors of a Volkswagen Polo 5 incorporate a set of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. Generally you will have a sound signal in the cabin which will rise in intensity with the closeness of the obstacle and sometimes a visual marker in complement. The reversing radars of a Volkswagen Polo 5 will enable you for parking, but also for security and keeping away from pedestrians.

How to install parking sensors on a Volkswagen Polo 5?

We now advance to the section that you are quite likely most interested in, installing reverse parking sensors on a Volkswagen Polo 5. This part is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Volkswagen Polo 5.

How to change a broken backup sensors on a Volkswagen Polo 5

First we’ll see how to change a broken parking sensor on an Volkswagen Polo 5. If your Volkswagen Polo 5 has suffered a rear impact and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to let the system to function effectively. Good thing for you this procedure is really simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take off the broken parking sensor from your Volkswagen Polo 5, this part is very intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an Volkswagen Polo 5

    Now we move on to the part you’re most likely most interested in, how to install a reverse sensor set up on a Volkswagen Polo 5 that doesn’t have one? As we explained earlier, you’re lucky because many of OEMs now offer aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will surely have to remove the bumper of your Volkswagen Polo 5 for the set up, do not be reluctant to read our content page on this subject to learn the procedure to follow. If you don’t feel like it, you can call a specialist, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to stick to the installation instructions, but we summarize here the main simple steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Volkswagen Polo 5

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Polo 5. There are two types, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Stick to the installation owners manual which is accessible with some electrical knowledges.
      • Determine the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Volkswagen Polo 5?

        Price of replacing a broken reversing parking sensor for an Volkswagen Polo 5

        The replacement of a destroyed reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is required to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Volkswagen Polo 5

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality set up.

        Price of a parking sensors kit without drilling for a Volkswagen Polo 5

        To conclude, for the price of a reversing radar without drilling for your Volkswagen Polo 5, no matter what version you choose, you will have to pay between 30 and 60 euros.

        If you have any additional questions about the Volkswagen Polo 5, do not hesitate to consult our Volkswagen Polo 5 category.